How to Remove and Install a MAP Sensor on 2006 Dodge Ram 1500?

At the front of the intake manifold near the throttle body lies the Manifold Absolute Pressure (MAP) sensor, closed with an O-ring (2). First, disconnect the connector and then wipe the vicinity of the MAP sensor. After that, unscrew the two mounting bolts and pull the MAP sensor out of the intake manifold to inspect the O-ring. Before placing the MAP sensor, blow it out, inspect for damage and set aside any leftover O-rings. Insert the sensor into the manifold, add the bolts to connect the parts and secure the electrical connector again.

OEM 2006 Dodge Ram 1500 MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2006 Dodge Ram 1500 M.A.P. Sensor Part Number: 56041018AD
$97.73 MSRP: $149.00
You Save: $51.27 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 56041018AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041018AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 1500 M.A.P. Sensor Part Number: 4686684AB
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Pressure Sensor; MAP Sensor
- Replaces: 4686684AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.0 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4686684AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- SRT-10 | 10 Cyl 8.3 L GAS, 8.3L V10

2006 Dodge Ram 1500 MAP Sensor Parts and Q&A

Q: How to Remove and Install a MAP Sensor on 2006 Dodge Ram 1500?
A: At the front of the intake manifold near the throttle body lies the Manifold Absolute Pressure (MAP) sensor, closed with an O-ring (2). First, disconnect the connector and then wipe the vicinity of the MAP sensor. After that, unscrew the two mounting bolts and pull the MAP sensor out of the intake manifold to inspect the O-ring. Before placing the MAP sensor, blow it out, inspect for damage and set aside any leftover O-rings. Insert the sensor into the manifold, add the bolts to connect the parts and secure the electrical connector again.