How to Remove and Install the Camshaft Position Sensor on the Right Cylinder Head on 2006 Dodge Ram 1500?

In order to install the Camshaft Position Sensor (CMP), disconnection of the electrical connector and the removal of the mounting bolt are required. Rotate the sensor out, and inspect the O-ring. To install, wipe the hole, grease the O-ring, and screw the sensor in and have it even. Tighten the bolt to 12 N.m and re-connect electrical connector.

OEM 2006 Dodge Ram 1500 Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Camshaft Position Sensors found

View related parts
2006 Dodge Ram 1500 Camshaft Position Sensor Part Number: 56041584AF
$105.20 MSRP: $158.00
You Save: $52.80 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Camshaft Sensor; Sensor Camshaft
- Replaces: 56041584AE, 56028133AE, 56028133AD, 56041584AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.4 x 2.1 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041584AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, Sport, TRX4 | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 1500 Camshaft Position Sensor Part Number: 5245084
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor; Sensor, Cam Signal (Camshaft Position Sensor) Spacer Use 5252229; Sensor Camshaft
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5245084
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Dodge Ram 1500 Submodels:
- SRT-10 | 10 Cyl 8.3 L GAS

2006 Dodge Ram 1500 Camshaft Position Sensor Parts and Q&A

Q: How to Remove and Install the Camshaft Position Sensor on the Right Cylinder Head on 2006 Dodge Ram 1500?
A: In order to install the Camshaft Position Sensor (CMP), disconnection of the electrical connector and the removal of the mounting bolt are required. Rotate the sensor out, and inspect the O-ring. To install, wipe the hole, grease the O-ring, and screw the sensor in and have it even. Tighten the bolt to 12 N.m and re-connect electrical connector.