How to Check and Install a Piston Ring Set on 2006 Dodge Ram 1500?

Check the clearance of ring before reinstalling or fitting new rings, clean cylinder bore, and place the ring 12 mm below the bottom of the bore. Square with a piston, measure the end gap using a feeler gauge. Install rings sequentially, making sure that they are well oriented and spaced.

OEM 2006 Dodge Ram 1500 Piston Ring Set

Piston Ring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Piston Ring Sets found

View related parts
2006 Dodge Ram 1500 Piston Rings Part Number: 5086002AC
$49.89 MSRP: $63.25
You Save: $13.36 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Package Part - Piston; Piston Ring; Ring Package Piston Standard Size, one package for one piston.
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.2 x 5.1 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5086002AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 1500 Piston Rings Part Number: 5012364AE
Product Specifications
- Other Name: Package Part - Piston; Piston Ring; Ring Package Piston Standard Size; Ring Kit Piston Standard
- Replaces: 5012364AC, 5012364AD
- Item Weight: 1.40 Pounds
- Item Dimensions: 0.3 x 4.2 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5012364AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2006 Dodge Ram 1500 Piston Ring Set Parts and Q&A

Q: How to Check and Install a Piston Ring Set on 2006 Dodge Ram 1500?
A: Check the clearance of ring before reinstalling or fitting new rings, clean cylinder bore, and place the ring 12 mm below the bottom of the bore. Square with a piston, measure the end gap using a feeler gauge. Install rings sequentially, making sure that they are well oriented and spaced.