How to Service a Coolant Temperature Sensor on 2006 Dodge Stratus?

To service the Engine Coolant Temperature Sensor, make sure that the engine is cold, drain the cooling system below the sensor. Remove the sensor from the circuit of the disconnect and reinstall then torque to 19 Nm (168 inch lbs.). Reconnect the electrical connector and fill the cooling system to complete.

OEM 2006 Dodge Stratus Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Temperature Sensor found

View related parts
2006 Dodge Stratus Coolant Temperature Sensor Part Number: 5269870AB
$63.79 MSRP: $86.70
You Save: $22.91 (27%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Coolant Temperature; Engine Coolant Temperature Sensor; Sender Unit, Coolant Temperature; Temperature Sensor; Temperature Coolant Sensor; Temperature Sending Unit; Sensor Coolant Temperature
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.9 x 1.0 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5269870AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Stratus Submodels:
- ES, R/T, SE, SE Plus, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS

2006 Dodge Stratus Coolant Temperature Sensor Parts and Q&A

Q: How to Service a Coolant Temperature Sensor on 2006 Dodge Stratus?
A: To service the Engine Coolant Temperature Sensor, make sure that the engine is cold, drain the cooling system below the sensor. Remove the sensor from the circuit of the disconnect and reinstall then torque to 19 Nm (168 inch lbs.). Reconnect the electrical connector and fill the cooling system to complete.