How to Maintain a Knock Sensor on a 4-Cylinder Engine on 2006 Dodge Stratus?

To service the knock sensor on a 4-cylinder engine, disconnect the electrical connector and remove the sensor with a crow foot socket. Install the new sensor in the same location, tightening it to 10 N.m (7 ft. lbs.) to ensure proper performance, then reconnect the electrical connector.

OEM 2006 Dodge Stratus Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Knock Sensors found

View related parts
2006 Dodge Stratus Knock Sensor Part Number: 4606093AD
$103.54 MSRP: $157.00
You Save: $53.46 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Detonation; Ignition Knock (Detonation) Sensor; Sensor; Sensor Detonation
- Replaces: 4606093
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.3 x 2.7 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4606093AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Stratus Submodels:
- R/T, SXT | 2.7L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2006 Dodge Stratus Knock Sensor Part Number: 5033316AB
$128.23 MSRP: $194.00
You Save: $65.77 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; MAP Sensor; Sensor Knock
- Replaces: 5033316AA, 56028563AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 1.3 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5033316AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Stratus Submodels:
- ES, SE, SXT | 2.4L L4, 4 Cyl 2.4 L GAS

2006 Dodge Stratus Knock Sensor Parts and Q&A

Q: How to Maintain a Knock Sensor on a 4-Cylinder Engine on 2006 Dodge Stratus?
A: To service the knock sensor on a 4-cylinder engine, disconnect the electrical connector and remove the sensor with a crow foot socket. Install the new sensor in the same location, tightening it to 10 N.m (7 ft. lbs.) to ensure proper performance, then reconnect the electrical connector.