OEM 2006 Dodge Stratus Engine Control Module

2006 Dodge Stratus Engine Control Module Parts and Q&A

• Q: How to Program the Secret Key into a New Engine Control Module After Replacement on 2006 Dodge Stratus?

  A: Before putting the new Pcm into a car, lock in the ignition with the parking brake or gear in park. Choose Skim on the scan tool, then Theft Alarm and finally Miscellaneous. With the engine off, press Pcm Replaced (Gas Engine), then access the vehicle's secured system using its four-digit Pin. After selection, press Enter to update the Pcm Vin. If you enter your code wrong three times, the system will block secure access for one hour; exit lockout by letting the ignition be on Run for one hour, ensuring all offboard equipment is off and using a battery charger if the battery is weak. As soon as you enter the correct Pin, press Enter so the secret key can be carried over to the Pcm from the Skim. Next, hit Page Back and choose Engine, Miscellaneous and Sri Memory Check. The scan tool asks if the odometer reading is within a decided range; choose either Yes or No. If No is picked, the scan tool will get the current odometer reading from the car by asking the Instrument Panel and you should enter that before pressing Enter.