How to Maintain and Fix a Door Hinge Without Taking Off the Door on 2006 Jeep Commander?

If each rear door hinge is replaced one after the other and the proper body sealant is used, the door does not have to be removed. First, start with the front door and remove the rear door wire harness from the body one. Draw a line on the B-pillar at the rear door hinge location with a grease pencil, lift the door off the ground with a proper tool and undo the five bolts from the hinges to the B-pillar. Take out the rear door and set it on a table, then mark the Sitting where the door's hinges are attached on the back of the door. You should not remove the epoxy bonded washers attached to the door hinges; if you do, you will likely need to reposition the door. After that, remove all of the nuts that secure the hinges at the back of the door to the doorpost. When installing, fasten the back hinge to the door and if the epoxy washers are no longer in place, add them now. Gently put on the nuts that hold the hinges to the rear door, adjust the hinges according to the marks you made during removal and tighten the nuts to 31 N.m (23 ft.lbs). Push the rear door against the body and use a device to lift it, then crudely add the bolts that link the door hinges to the B-pillar. Start with the rear door by fitting it to the body using the saved marks from removal and secure the bolts to 28 N.m (21 ft.lbs). Last, match the rear door wire harness to the body wire harness, attach the negative battery cable again and change the rear door if necessary.

OEM 2006 Jeep Commander Door Hinge

Interior Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Door Hinges found

View related parts
2006 Jeep Commander Upper Hinge, Front Driver Side Part Number: 55369195AD
$69.07 MSRP: $104.00
You Save: $34.93 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Door; Door Hinge, Front Left Upper, Rear Left Upper; Hinge Door Upper; Door Hinge
- Position: Front Upper Driver Side
- Replaces: 55369195AB, 55369195AC, 55369195AA
- Item Weight: 1.70 Pounds
- Item Dimensions: 5.5 x 3.9 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55369195AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Upper Hinge, Front Passenger Side Part Number: 55369194AD
$69.07 MSRP: $104.00
You Save: $34.93 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Door; Door Hinge, Front Right Upper, Rear Right Upper; Hinge Door Upper; Door Hinge
- Position: Front Upper Passenger Side
- Replaces: 55369194AC, 55369194AB, 55369194AA
- Item Weight: 1.70 Pounds
- Item Dimensions: 5.4 x 3.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55369194AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Lower Hinge, Front Driver Side Part Number: 55369193AF
Product Specifications
- Other Name: Hinge - Front Door Lower; Door Hinge, Front Left Lower; Hinge Front Door Lower; Door Hinge
- Position: Front Lower Driver Side
- Replaces: 55369187AB, 55369193AB, 55369193AE, 55369187AE, 55369187AA, 55369193AC, 55369187AC, 55369193AD, 55369193AA, 55369187AD
- Item Weight: 2.30 Pounds
- Item Dimensions: 4.7 x 4.4 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55369193AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Hinge, Rear Driver Side Part Number: 55369023AC
Product Specifications
- Other Name: Hinge - Liftglass; Liftgate Glass Hinge, Rear Left; Hinge Liftglass
- Position: Rear Driver Side
- Replaces: 55369023AA, 55369023AB
- Item Weight: 1.20 Pounds
- Item Dimensions: 5.4 x 2.3 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55369023AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Hinge, Rear Passenger Side Part Number: 55369022AC
Product Specifications
- Other Name: Hinge - Liftglass; Liftgate Glass Hinge, Rear Right; Hinge Liftglass
- Position: Rear Passenger Side
- Replaces: 55369022AA, 55369022AB
- Item Weight: 1.30 Pounds
- Item Dimensions: 5.4 x 2.2 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55369022AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Lower Hinge, Rear Driver Side Part Number: 55369189AF
Product Specifications
- Other Name: Hinge - Rear Door Lower; Door Hinge, Rear Left Lower; Hinge Rear Door Lower Lower; Hinge Rear Door Lower; Door Hinge
- Position: Rear Lower Driver Side
- Replaces: 55369189AC, 55369189AA, 55369189AD, 55369189AE, 55369189AB
- Item Weight: 2.30 Pounds
- Item Dimensions: 5.6 x 4.7 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55369189AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Hinge, Rear Part Number: 55396529AB
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge, Rear; Door Hinge; Hinge Liftgate; Liftgate Hinge
- Position: Rear
- Replaces: 55396529AA
- Item Weight: 1.00 Pounds
- Item Dimensions: 4.9 x 3.7 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55396529AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Lower Hinge, Front Passenger Side Part Number: 55369192AF
Product Specifications
- Other Name: Hinge - Front Door Lower; Door Hinge, Front Right Lower; Hinge Front Door Lower; Door Hinge
- Position: Front Lower Passenger Side
- Replaces: 55369186AB, 55369192AD, 55369186AE, 55369186AA, 55369192AB, 55369186AD, 55369192AC, 55369192AA, 55369192AE, 55369186AC
- Item Weight: 2.30 Pounds
- Item Dimensions: 4.7 x 4.3 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55369192AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Lower Hinge, Rear Passenger Side Part Number: 55369188AF
Product Specifications
- Other Name: Hinge - Rear Door Lower; Door Hinge, Rear Right Lower; Hinge Rear Door Lower Lower; Hinge Rear Door Lower; Door Hinge
- Position: Rear Lower Passenger Side
- Replaces: 55369188AB, 55369188AA, 55369188AD, 55369188AE, 55369188AC
- Item Weight: 2.40 Pounds
- Item Dimensions: 5.5 x 4.8 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55369188AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2006 Jeep Commander Door Hinge Parts and Q&A

Q: How to Maintain and Fix a Door Hinge Without Taking Off the Door on 2006 Jeep Commander?
A: If each rear door hinge is replaced one after the other and the proper body sealant is used, the door does not have to be removed. First, start with the front door and remove the rear door wire harness from the body one. Draw a line on the B-pillar at the rear door hinge location with a grease pencil, lift the door off the ground with a proper tool and undo the five bolts from the hinges to the B-pillar. Take out the rear door and set it on a table, then mark the Sitting where the door's hinges are attached on the back of the door. You should not remove the epoxy bonded washers attached to the door hinges; if you do, you will likely need to reposition the door. After that, remove all of the nuts that secure the hinges at the back of the door to the doorpost. When installing, fasten the back hinge to the door and if the epoxy washers are no longer in place, add them now. Gently put on the nuts that hold the hinges to the rear door, adjust the hinges according to the marks you made during removal and tighten the nuts to 31 N.m (23 ft.lbs). Push the rear door against the body and use a device to lift it, then crudely add the bolts that link the door hinges to the B-pillar. Start with the rear door by fitting it to the body using the saved marks from removal and secure the bolts to 28 N.m (21 ft.lbs). Last, match the rear door wire harness to the body wire harness, attach the negative battery cable again and change the rear door if necessary.