Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2006 Jeep Wrangler Air Bag

Air Bag Module
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bags found

  • 2006 Jeep Wrangler Air Bag - 55314982AF
    2006 Jeep Wrangler Air Bag Diagram - 55314982AF
    View related parts

    2006 Jeep Wrangler Passenger Air Bag, Upper Passenger Side Part Number: 55314982AF

    Product Specifications
    • Other Name: Airbag - Passenger; Instrument Panel Air Bag, Upper; Passenger Inflator Module; Air Bag Passenger
    • Position: Upper Passenger Side
    • Item Weight: 7.70 Pounds
    • Item Dimensions: 15.1 x 10.7 x 6.7 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 55314982AF
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2006 Jeep Wrangler Submodels:
    • 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
  • 2006 Jeep Wrangler Air Bag - 5JG52DX9AD
    2006 Jeep Wrangler Air Bag Diagram - 5JG52DX9AD
    View related parts

    2006 Jeep Wrangler Driver Inflator Module, Driver Side Part Number: 5JG52DX9AD

    Product Specifications
    • Other Name: Airbag - Driver; Steering Wheel Air Bag; Driver Air Bag; Air Bag Driver
    • Position: Driver Side
    • Item Weight: 3.70 Pounds
    • Item Dimensions: 12.9 x 8.4 x 4.8 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5JG52DX9AD
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2006 Jeep Wrangler Submodels:
    • 65th Anniversary Edition, Rubicon, SE, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 6 Cyl 4.0 L GAS

2006 Jeep Wrangler Air Bag Parts and Q&A

  • Q: How to Maintain the Passenger Air Bag on 2006 Jeep Wrangler?
    A: The passenger air bag should be serviced by first disconnecting and isolating the battery negative cable to turn off the supplemental restraint system and wait for two minutes afterward to let the system capacitor discharge. Make sure to use rubber gloves, eye protection and a long-sleeved shirt when handling an air bag because chemicals on the air bag and nearby surfaces may be irritating. Start by taking the instrument panel out of the car and setting it down on a safe area where it won't get scratched or dented. After that, take out the three nuts attaching the passenger air bag to the weld studs on the instrument panel. Attach the new air bag over the weld studs and put in and tighten the three nuts to 12 N.m (105 in. lbs.) to secure the rear mounting brackets. Connect the air bag wire back to the instrument panel and make sure it is completely engaged. After finishing service to any supplemental restraint system part, do not reconnect the battery negative cable until the verification test is done.

Related 2006 Jeep Wrangler Parts

Alternate Year Models

+
2005 Jeep Wrangler Air Bag 2007 Jeep Wrangler Air Bag