How to Remove and Replace a Rear Brake Caliper on 2008 Chrysler Crossfire?

You should install the rear brake pads before moving on to remove and replace the caliper. Hold the brake hose onto the caliper with a line wrench, then turn the caliper until it is snug and the brake hose is not twisted. Only after that, install the caliper to the knuckle. Mount the calipers and screw on the bolts to a tightness of 55 Nm (41 ft. lbs.). After you have finished, run bleeding the brakes using either your hands or a hydraulic pump. After you finish bleeding, bring in the wheel and tire assembly and wait to move the vehicle until a strong brake pedal return is noticed. Take the vehicle down and press the brake pedal many times to achieve tight contact of the brake parts. If needed, add new fluid to the brake fluid tank and inspect the car for leaks.

OEM 2008 Chrysler Crossfire Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Calipers found

View related parts
2008 Chrysler Crossfire Caliper, Rear Driver Side Part Number: 5126303AA
$67.99 MSRP: $86.18
You Save: $18.19 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left; Caliper Disc Brake; Brake Caliper
- Position: Rear Driver Side
- Item Weight: 3.20 Pounds
- Item Dimensions: 7.4 x 6.5 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5126303AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Crossfire Submodels:
- Base, Limited | 6 Cyl 3.2 L GAS
View related parts
2008 Chrysler Crossfire Caliper, Front Driver Side Part Number: 5139587AA
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Left; Caliper Disc Brake; Brake Caliper
- Position: Front Driver Side
- Item Weight: 9.20 Pounds
- Item Dimensions: 8.3 x 7.0 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5139587AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Crossfire Submodels:
- Base, Limited | 6 Cyl 3.2 L GAS
View related parts
2008 Chrysler Crossfire Caliper, Front Passenger Side Part Number: 5139586AA
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Right; Caliper Disc Brake; Brake Caliper
- Position: Front Passenger Side
- Item Weight: 8.90 Pounds
- Item Dimensions: 8.4 x 6.7 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5139586AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Crossfire Submodels:
- Base, Limited | 6 Cyl 3.2 L GAS
View related parts
2008 Chrysler Crossfire Caliper, Rear Passenger Side Part Number: 5126302AA
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Right; Caliper Disc Brake; Brake Caliper
- Position: Rear Passenger Side
- Item Weight: 6.60 Pounds
- Item Dimensions: 7.7 x 6.8 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5126302AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Crossfire Submodels:
- Base, Limited | 6 Cyl 3.2 L GAS

2008 Chrysler Crossfire Brake Caliper Parts and Q&A

Q: How to Remove and Replace a Rear Brake Caliper on 2008 Chrysler Crossfire?
A: You should install the rear brake pads before moving on to remove and replace the caliper. Hold the brake hose onto the caliper with a line wrench, then turn the caliper until it is snug and the brake hose is not twisted. Only after that, install the caliper to the knuckle. Mount the calipers and screw on the bolts to a tightness of 55 Nm (41 ft. lbs.). After you have finished, run bleeding the brakes using either your hands or a hydraulic pump. After you finish bleeding, bring in the wheel and tire assembly and wait to move the vehicle until a strong brake pedal return is noticed. Take the vehicle down and press the brake pedal many times to achieve tight contact of the brake parts. If needed, add new fluid to the brake fluid tank and inspect the car for leaks.