Other Name: Hinge - Rear Door; Door Hinge, Rear Left Lower, Rear Right Upper; Upper Hinge; Hinge Rear Door; Door Hinge
Position: Rear Lower Driver Side
Item Weight: 1.70 Pounds
Item Dimensions: 4.1 x 4.3 x 2.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5103344AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Chrysler Pacifica Submodels:
Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
2007 Chrysler Pacifica Door Hinge Parts and Q&A
Q: How to Replace a Rear Door Hinge on 2007 Chrysler Pacifica?
A: It all starts with releasing the rear door latch and standing outside while the door is open. Make marks on the hinge's left and right sides on both the door and the pillar to help you align the door during installation. After that, take out the trim from the B-pillar to reach the bolts inside and outside the pillar. Place a lifting device beneath the door to hold it up, then take out the hinge bolts from the B-pillar and the bolts that tie the door to the hinge at the rear side. After that, remove the door hinge from the vehicle.