How to Remove and Replace an Engine Control Module on 2007 Chrysler Pacifica?

To replace the Engine Control Module, you must start with DIS-connecting the negative battery cable. Raise the vehicle, and then remove the left front wheel and splash shield. Unlock and remove the 4 connectors, and remove the 3 mounting screws to remove the PCM.

OEM 2007 Chrysler Pacifica Engine Control Module

Engine Control Computer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Engine Control Modules found

View related parts
2007 Chrysler Pacifica PCM Part Number: 5094745AG
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM
- Replaces: 5094745AC, 5094745AE, 5094745AF, RL094745AG, 5094745AD
- Item Weight: 3.90 Pounds
- Item Dimensions: 10.8 x 6.4 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5094745AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Pacifica Submodels:
- Base | 3.8L V6, 6 Cyl 3.8 L GAS
View related parts
2007 Chrysler Pacifica PCM Part Number: 5094826AF
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM
- Replaces: RL094826AF, 5094826AC, 5094826AB, 5094826AD, 5094826AE
- Item Weight: 3.80 Pounds
- Item Dimensions: 10.8 x 6.3 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5094826AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 4.0L V6, 6 Cyl 4.0 L GAS

2007 Chrysler Pacifica Engine Control Module Parts and Q&A

Q: How to Remove and Replace an Engine Control Module on 2007 Chrysler Pacifica?
A: To replace the Engine Control Module, you must start with DIS-connecting the negative battery cable. Raise the vehicle, and then remove the left front wheel and splash shield. Unlock and remove the 4 connectors, and remove the 3 mounting screws to remove the PCM.