How to Install an Oil Pan on 2007 Chrysler Pacifica?

Prepare the surface where the parts join by cleaning it and putting a 1/8 inch of Mopar(R) Engine RTV GEN II sealant on the rim joining the chain case cover and the rear seal retainer. After that, install the new pan gasket onto the oil pan. Remove the oil drain tubes, insert the oil pan, then secure it with all fasteners at 12 Nm (105 in. lbs.). Following that, attach the flex plate cover, then the right engine mount bracket. If your car has an in block heater, install it and mount the proper heat shield for the engine. Place the car lower to install the oil level indicator. After that, link the negative terminal to the battery and fill the crankcase with oil to its proper level.

OEM 2007 Chrysler Pacifica Oil Pan

Oil Drain Pan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Pans found

View related parts
2007 Chrysler Pacifica Oil Pan Part Number: 4892122AA
$296.14 MSRP: $452.00
You Save: $155.86 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan - Oil; Engine Oil Pan; Pan Oil Refer To Illustration 105 For Julian Date Code Information; Pan Oil
- Item Weight: 9.20 Pounds
- Item Dimensions: 20.8 x 12.8 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4892122AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 4.0 L GAS
View related parts
2007 Chrysler Pacifica Oil Pan Part Number: 4648930AA
$97.54 MSRP: $202.00
You Save: $104.46 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan - Engine Oil; Engine Oil Pan; Pan Engine Oil
- Item Weight: 5.40 Pounds
- Item Dimensions: 5.6 x 10.3 x 20.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4648930AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Pacifica Submodels:
- Base, LX | 6 Cyl 3.8 L GAS

2007 Chrysler Pacifica Oil Pan Parts and Q&A

Q: How to Install an Oil Pan on 2007 Chrysler Pacifica?
A: Prepare the surface where the parts join by cleaning it and putting a 1/8 inch of Mopar(R) Engine RTV GEN II sealant on the rim joining the chain case cover and the rear seal retainer. After that, install the new pan gasket onto the oil pan. Remove the oil drain tubes, insert the oil pan, then secure it with all fasteners at 12 Nm (105 in. lbs.). Following that, attach the flex plate cover, then the right engine mount bracket. If your car has an in block heater, install it and mount the proper heat shield for the engine. Place the car lower to install the oil level indicator. After that, link the negative terminal to the battery and fill the crankcase with oil to its proper level.