Other Name: Bracket - Seat Belt; Seat Belt Bracket, Rear Right; Bracket Seat Belt
Position: Rear Passenger Side
Condition: New
Fitment Type: Direct Replacement
SKU: 4680554AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
Fits the following 2007 Chrysler Pacifica Submodels:
Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
2007 Chrysler Pacifica Seat Belt Parts and Q&A
Q: How to Service and Repair a Seat Belt on 2007 Chrysler Pacifica?
A: Remove the second and third row seats on the side where the seat belt and retractor are, before starting to service the seat belt. Once that's done, uncover the second and third row lower seat belt anchor bolt covers and take out the lower seat belt anchor bolts attached to the lower quarter trim at the C and D-pillars. After dealing with the front wheel arches, next take out the lower quarter trim panel. Go on to take out the two bolts that secure the seat belt retractors to your vehicle. After that, detach the turning loop cover and its bolt from the upper quarter panel. Afterwards, take away the seat belt and retractor from the vehicle. For replacing a single service web stop button, refer to the instructions given in the service kit.