How to Service and Repair the Clutch Slave Cylinder for 1.6/2.4L on 2007 Chrysler PT Cruiser?

For 1.6/2.4L models, excluding Diesel/Turbo, confirm the brake master cylinder fluid is full and it is tightly capped before replacing or servicing the clutch slave cylinder. Look at the brake fluid. If it is low, top it off and reinstall the brake master cylinder cap. Lift the car on a hoist, then, using a good screwdriver, take out the snap ring holders on the hydraulic lines from the slave cylinder. Right now, make sure the lines stay in one unit. After the previous steps, take out the bolts that mount the slave cylinder to the transaxle. After that, remove the old slave cylinder from the transaxle and take it out of the hydraulic tube. Place the new cylinder onto the plumbing and lock it in by using both retaining clips.

OEM 2007 Chrysler PT Cruiser Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Clutch Slave Cylinders found

View related parts
2007 Chrysler PT Cruiser Slave Cylinder Part Number: 5273382AC
$549.63 MSRP: $713.00
You Save: $163.37 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder - Clutch Slave; Clutch Slave Cylinder
- Replaces: 5273382AB
- Item Weight: 1.90 Pounds
- Item Dimensions: 8.1 x 8.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5273382AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler PT Cruiser Submodels:
- Base, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2007 Chrysler PT Cruiser Slave Cylinder Part Number: 5273512AC
Product Specifications
- Other Name: Actuator - Hydraulic Clutch; Clutch Slave Cylinder; Actuator Hydraulic Clutch
- Replaces: 5273512AB, 5273512AA
- Item Weight: 2.80 Pounds
- Item Dimensions: 7.1 x 16.5 x 30.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5273512AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler PT Cruiser Submodels:
- Base, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2007 Chrysler PT Cruiser Master Cylinder Part Number: 5273518AC
Product Specifications
- Other Name: Actuator - Hydraulic Clutch; Actuator Hydraulic Clutch
- Replaces: 5273518AA, 5273518AB
- Item Weight: 2.40 Pounds
- Item Dimensions: 20.0 x 8.9 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5273518AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler PT Cruiser Submodels:
- Base, GT, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS

2007 Chrysler PT Cruiser Clutch Slave Cylinder Parts and Q&A

Q: How to Service and Repair the Clutch Slave Cylinder for 1.6/2.4L on 2007 Chrysler PT Cruiser?
A: For 1.6/2.4L models, excluding Diesel/Turbo, confirm the brake master cylinder fluid is full and it is tightly capped before replacing or servicing the clutch slave cylinder. Look at the brake fluid. If it is low, top it off and reinstall the brake master cylinder cap. Lift the car on a hoist, then, using a good screwdriver, take out the snap ring holders on the hydraulic lines from the slave cylinder. Right now, make sure the lines stay in one unit. After the previous steps, take out the bolts that mount the slave cylinder to the transaxle. After that, remove the old slave cylinder from the transaxle and take it out of the hydraulic tube. Place the new cylinder onto the plumbing and lock it in by using both retaining clips.