How to Service a Clutch Slave Cylinder on 2008 Chrysler PT Cruiser?

Make sure there is brake master fluid up to the reservoir cap line and the cap is screwed in securely before starting the Clutch Slave Cylinder replacement. Make sure your brake fluid level is correct and top off if needed. Once done, put on and tighten the cap of the master brake cylinder. Place the vehicle on a hoist, then use a proper screwdriver to take out both retainers from the hydraulic line snap rings. Undo and take off the slave cylinder-to-transaxle bolts. Have a new slave cylinder at hand, then take off the old one from the transaxle and remove it from the hydraulic tube. Link the replacement slave cylinder to the plumbing and clip it into place with both retaining clips.

OEM 2008 Chrysler PT Cruiser Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Clutch Slave Cylinders found

View related parts
2008 Chrysler PT Cruiser Slave Cylinder Part Number: 5273382AC
$549.63 MSRP: $713.00
You Save: $163.37 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder - Clutch Slave; Clutch Slave Cylinder
- Replaces: 5273382AB
- Item Weight: 1.90 Pounds
- Item Dimensions: 8.1 x 8.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5273382AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler PT Cruiser Submodels:
- Base, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2008 Chrysler PT Cruiser Slave Cylinder Part Number: 5273512AC
Product Specifications
- Other Name: Actuator - Hydraulic Clutch; Clutch Slave Cylinder; Actuator Hydraulic Clutch
- Replaces: 5273512AB, 5273512AA
- Item Weight: 2.80 Pounds
- Item Dimensions: 7.1 x 16.5 x 30.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5273512AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler PT Cruiser Submodels:
- Base, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
2008 Chrysler PT Cruiser Master Cylinder Part Number: 5273518AC
Product Specifications
- Other Name: Actuator - Hydraulic Clutch; Actuator Hydraulic Clutch
- Replaces: 5273518AA, 5273518AB
- Item Weight: 2.40 Pounds
- Item Dimensions: 20.0 x 8.9 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5273518AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler PT Cruiser Submodels:
- Base, GT, Limited, Touring | 4 Cyl 2.4 L GAS

2008 Chrysler PT Cruiser Clutch Slave Cylinder Parts and Q&A

Q: How to Service a Clutch Slave Cylinder on 2008 Chrysler PT Cruiser?
A: Make sure there is brake master fluid up to the reservoir cap line and the cap is screwed in securely before starting the Clutch Slave Cylinder replacement. Make sure your brake fluid level is correct and top off if needed. Once done, put on and tighten the cap of the master brake cylinder. Place the vehicle on a hoist, then use a proper screwdriver to take out both retainers from the hydraulic line snap rings. Undo and take off the slave cylinder-to-transaxle bolts. Have a new slave cylinder at hand, then take off the old one from the transaxle and remove it from the hydraulic tube. Link the replacement slave cylinder to the plumbing and clip it into place with both retaining clips.