How to Service and Repair the Air Bag Control Module on 2007 Chrysler Sebring?

The first step in service and repair of the Occupant Restraint Controller is to connect the two orange ORC connectors 4 and 5 securely. After that, place ORC 3 so the arrow is forward and insert the bracket studs 1 into the console studs 2. Set the three ORC retaining nuts 2 by hand and use the accessible socket wrench to tighten them to 9 Nm (79.5 in. lbs.). Fit the center console into place as the finishing part. You should never attach the battery negative cable until after performing a system test, as it could cause serious or fatal injury.

OEM 2007 Chrysler Sebring Air Bag Control Module

SRS Airbag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Control Modules found

View related parts
2007 Chrysler Sebring Control Module Part Number: 4672404AC
Product Specifications
- Other Name: Module - Air Bag Control; Air Bag Control Module; Diagnostic Unit
- Replaces: 4672404AB, 68004123AA
- Item Weight: 1.20 Pounds
- Item Dimensions: 6.4 x 6.5 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4672404AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Chrysler Sebring Passenger Discriminating Sensor Part Number: 4896028AB
Product Specifications
- Other Name: Module - Occupant Classification; Air Bag Seat Sensor Mat; Occupant Module
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896028AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2007 Chrysler Sebring Air Bag Control Module Parts and Q&A

Q: How to Service and Repair the Air Bag Control Module on 2007 Chrysler Sebring?
A: The first step in service and repair of the Occupant Restraint Controller is to connect the two orange ORC connectors 4 and 5 securely. After that, place ORC 3 so the arrow is forward and insert the bracket studs 1 into the console studs 2. Set the three ORC retaining nuts 2 by hand and use the accessible socket wrench to tighten them to 9 Nm (79.5 in. lbs.). Fit the center console into place as the finishing part. You should never attach the battery negative cable until after performing a system test, as it could cause serious or fatal injury.