JeepParts
My Garage
My Account
Cart
OEM 2007 Chrysler Sebring Parking Brake Cable
Emergency Parking Brake Release Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Parking Brake Cables found
2007 Chrysler Sebring Cable Part Number: 5085747AH
$48.85 MSRP: $71.70You Save: $22.85 (32%)Product Specifications- Other Name: Cable - Parking Brake; Brake Cable; Cable Parking Brake
- Replaces: 5085747AG, 5085747AD, 5085747AE, 5085747AF
- Item Weight: 1.70 Pounds
- Item Dimensions: 68.7 x 1.1 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5085747AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Chrysler Sebring Cable Part Number: 5085745AE
Product Specifications- Other Name: Cable - Parking Brake; Brake Cable; Cable Parking Brake
- Replaces: 5085745AD
- Item Weight: 1.60 Pounds
- Item Dimensions: 16.0 x 16.1 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5085745AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Chrysler Sebring Cable Part Number: 5085744AE
Product Specifications- Other Name: Cable - Parking Brake; Brake Cable; Cable Parking Brake
- Replaces: 5085744AD
- Item Weight: 1.90 Pounds
- Item Dimensions: 18.7 x 13.7 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5085744AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Chrysler Sebring Cable Part Number: 5085746AG
Product Specifications- Other Name: Cable - Parking Brake; Brake Cable; Cable Parking Brake
- Replaces: 5085746AD, 5085746AE, 5085746AF
- Item Weight: 1.70 Pounds
- Item Dimensions: 72.1 x 1.1 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5085746AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Chrysler Sebring Parking Brake Cable Parts and Q&A
- Q: How to Maintain and Fix a Parking Brake Cable on 2007 Chrysler Sebring?A: Be sure to isolate the battery's negative post by removing its negative cable before working with the parking brake cable. Block the tires and wheels to stop the car from moving when you release the lever for the parking brake. Remove the console in the center and lower the flexible brake lever in the footwell. Open the adjusting nut on the output cable of the lever to remove pressure from the parking brake cables and then pull the parking brake cables out of the parking brake cable equalizer. Remove the back seat cushion and fold back the rear carpeting to see the parking brake cables on the floor in the rear. Collapse the retainer on the right or left cable with a 1/2 inch (13 mm) wrench, then pull the housing straight out of the bracket. Support the vehicle at the rear, remove the nuts from the hub nuts and get rid of the wheel assembly. After uncovering the brake shoes, push out the hair pin keeping the parking brake cable linked to the support plate. Remove the parking brake cable from its holder and the opening in the trailing link. Take out the screw that holds the cable routing clamp to the case and then remove the nut for the second cable routing clamp. Take out the parking brake cable with a sealing grommet by pulling it form the hole in the floor pan.
Related 2007 Chrysler Sebring Parts
2007 Chrysler Sebring Brake Booster
2007 Chrysler Sebring Brake Caliper
2007 Chrysler Sebring Brake Caliper Bracket
2007 Chrysler Sebring Brake Caliper Piston
2007 Chrysler Sebring Brake Disc
2007 Chrysler Sebring Brake Drum
2007 Chrysler Sebring Brake Line
2007 Chrysler Sebring Brake Master Cylinder
2007 Chrysler Sebring Brake Pad
2007 Chrysler Sebring Speed Sensor
2007 Chrysler Sebring Wheel Cylinder
2007 Chrysler Sebring Wheel Stud