How to Remove and Replace a Rear Brake Disc on 2007 Dodge Caliber?

You should first lift the car and support it, then unscrew the mounting nuts that connect the wheel and tire and remove them both. If the caliper is hard to remove, pull back slightly on the caliper piston to provide room for clearance between the pads and rotor; doing so by pulling on the inboard side of the caliper avoids pressing on the piston which may result in damage. After that, remove the lower guide pin bolt from the disc brake caliper. While raising the rear brake caliper, make certain you don't hurt or overstretch the flex hose. Move the caliper assembly upward on the upper guide pin bolt until you can take off the rotor and then hold it there with either a wire or a bungee cord. Attach your tool to any clips keeping the brake rotor onto the hub, then move the rotor off the bearing and remove it.

OEM 2007 Dodge Caliber Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Discs found

View related parts
2007 Dodge Caliber Rotor, Rear Part Number: 5105515AA
$77.99 MSRP: $117.00
You Save: $39.01 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Rotor Brake; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Item Weight: 9.30 Pounds
- Item Dimensions: 2.6 x 10.7 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5105515AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Dodge Caliber Rotor, Front Part Number: 5105514AA
$83.79 MSRP: $126.00
You Save: $42.21 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Rotor Brake Front; Disc Brake Rotor; Brake Rotor
- Position: Front
- Item Weight: 15.90 Pounds
- Item Dimensions: 2.2 x 12.3 x 12.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5105514AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Dodge Caliber Rotor, Front Part Number: 5105513AA
$25.92 MSRP: $139.00
You Save: $113.08 (82%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Rotor Brake Front; Disc Brake Rotor; Brake Rotor
- Position: Front
- Item Weight: 13.30 Pounds
- Item Dimensions: 11.7 x 11.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5105513AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Dodge Caliber Rotor, Rear Part Number: 4743999AA
$82.45 MSRP: $124.00
You Save: $41.55 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Rotor Brake; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Item Weight: 13.20 Pounds
- Item Dimensions: 12.3 x 12.4 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4743999AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2007 Dodge Caliber Brake Disc Parts and Q&A

Q: How to Remove and Replace a Rear Brake Disc on 2007 Dodge Caliber?
A: You should first lift the car and support it, then unscrew the mounting nuts that connect the wheel and tire and remove them both. If the caliper is hard to remove, pull back slightly on the caliper piston to provide room for clearance between the pads and rotor; doing so by pulling on the inboard side of the caliper avoids pressing on the piston which may result in damage. After that, remove the lower guide pin bolt from the disc brake caliper. While raising the rear brake caliper, make certain you don't hurt or overstretch the flex hose. Move the caliper assembly upward on the upper guide pin bolt until you can take off the rotor and then hold it there with either a wire or a bungee cord. Attach your tool to any clips keeping the brake rotor onto the hub, then move the rotor off the bearing and remove it.