How to Service and Repair a Front-Wheel-Drive Speed Sensor on 2007 Dodge Caliber?

In order to service the wheel speed sensor on a front-wheel-drive vehicle, start by getting rid of the cargo floor cover and the rear floor pan silencer. Remove the nuts securing the receiver or amplifier to the bottom of the car, if applicable and disconnect the wiring for the wheel speed sensor by opening the quarter panel opening. Withdraw the wheel speed sensor cable connector (2) from behind the wheel speed sensor through this opening. When that's done, park the wheel over a jack stand to support it, loosen (3) and remove the wheel mounting nuts and remove (1) the tire and wheel assembly. Take the grommet (2) off from the body (1) and pull the wheel speed sensor cable out through that hole. Remove the speed sensor clip (3) from the outside frame rail (4) as well as the screw (1) holding the cable routing clamp (3) to the rear suspension crossmember (4). Next, disconnect the routing clip (1) from the bottom link (2) and remove the screw (4) securing the cable routing clamp to the same part. Next, take out the screw (1) that is holding the wheel speed sensor head (3) in the rear of the hub and bearing (2) to bring the sensor loose from the car.

OEM 2007 Dodge Caliber Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Speed Sensors found

View related parts
2007 Dodge Caliber ABS Sensor, Front Passenger Side Part Number: 5105572AB
$38.64 MSRP: $57.25
You Save: $18.61 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Anti-Lock Brakes; Front Right ABS Wheel Speed Sensor.; Front Speed Sensor; Sensor Anti-Lock Brakes; ABS Wheel Speed Sensor
- Position: Front Passenger Side
- Replaces: 5105572AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 6.2 x 6.2 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5105572AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Dodge Caliber ABS Sensor, Front Driver Side Part Number: 5105573AB
$40.02 MSRP: $57.50
You Save: $17.48 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Anti-Lock Brakes; Front Left ABS Wheel Speed Sensor.; Front Speed Sensor; Sensor Anti-Lock Brakes; ABS Wheel Speed Sensor
- Position: Front Driver Side
- Replaces: 5105573AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 12.7 x 8.5 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5105573AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Dodge Caliber Vehicle Speed Sensor Part Number: 5189840AB
$69.24 MSRP: $105.00
You Save: $35.76 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Secondary Revolution
- Replaces: 5189840AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 1.8 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5189840AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Dodge Caliber Vehicle Speed Sensor Part Number: 5189841AB
$57.53 MSRP: $86.30
You Save: $28.77 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Primary Revolution
- Replaces: 5189841AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.6 x 1.1 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5189841AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2007 Dodge Caliber Speed Sensor Parts and Q&A

Q: How to Service and Repair a Front-Wheel-Drive Speed Sensor on 2007 Dodge Caliber?
A: In order to service the wheel speed sensor on a front-wheel-drive vehicle, start by getting rid of the cargo floor cover and the rear floor pan silencer. Remove the nuts securing the receiver or amplifier to the bottom of the car, if applicable and disconnect the wiring for the wheel speed sensor by opening the quarter panel opening. Withdraw the wheel speed sensor cable connector (2) from behind the wheel speed sensor through this opening. When that's done, park the wheel over a jack stand to support it, loosen (3) and remove the wheel mounting nuts and remove (1) the tire and wheel assembly. Take the grommet (2) off from the body (1) and pull the wheel speed sensor cable out through that hole. Remove the speed sensor clip (3) from the outside frame rail (4) as well as the screw (1) holding the cable routing clamp (3) to the rear suspension crossmember (4). Next, disconnect the routing clip (1) from the bottom link (2) and remove the screw (4) securing the cable routing clamp to the same part. Next, take out the screw (1) that is holding the wheel speed sensor head (3) in the rear of the hub and bearing (2) to bring the sensor loose from the car.