How to Install a Brake Fluid Level Sensor on 2007 Dodge Caliber?

When fitting the brake fluid level sensor, position it so as to fit into the right-side mounting hole on the master cylinder reservoir and then push it until the retaining tabs fit into position. Lastly attach the wiring harness to the switch.

OEM 2007 Dodge Caliber Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
2007 Dodge Caliber Level Sensor Part Number: 5175094AA
$10.79 MSRP: $15.50
You Save: $4.71 (31%)
Product Specifications
- Other Name: Sensor - Brake Fluid Level; Brake Fluid Level Switch; Fluid Level Sensor; Fluid Level Switch; Sensor Brake Fluid Level
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.2 x 0.7 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5175094AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2007 Dodge Caliber Brake Fluid Level Sensor Parts and Q&A

Q: How to Install a Brake Fluid Level Sensor on 2007 Dodge Caliber?
A: When fitting the brake fluid level sensor, position it so as to fit into the right-side mounting hole on the master cylinder reservoir and then push it until the retaining tabs fit into position. Lastly attach the wiring harness to the switch.