How Is the Brake Proportioning Valve Installed on 2007 Dodge Caliber?

First, set the valve in the port of the master cylinder port and tighten it to 30 Nm (22 ft. lbs.). After that, attach the designated brake tube to the proportioning valve and tighten the tube nut to 17 Nm (150 in. lbs.). After that, disconnect the brake pedal holder and bleed all the necessary brake lines. As the last step, use the car on the road to ensure the brakes are functioning normally.

OEM 2007 Dodge Caliber Brake Proportioning Valve

Proportioning Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Proportioning Valves found

View related parts
2007 Dodge Caliber Valve Part Number: 5175703AA
Product Specifications
- Other Name: Valve - Proportioning; Brake Proportioning Valve; Valve Proportioning
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.3 x 0.8 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5175703AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Dodge Caliber Valve Part Number: 5175702AA
Product Specifications
- Other Name: Valve - Proportioning; Brake Proportioning Valve; Valve Proportioning
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.4 x 0.8 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5175702AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2007 Dodge Caliber Brake Proportioning Valve Parts and Q&A

Q: How Is the Brake Proportioning Valve Installed on 2007 Dodge Caliber?
A: First, set the valve in the port of the master cylinder port and tighten it to 30 Nm (22 ft. lbs.). After that, attach the designated brake tube to the proportioning valve and tighten the tube nut to 17 Nm (150 in. lbs.). After that, disconnect the brake pedal holder and bleed all the necessary brake lines. As the last step, use the car on the road to ensure the brakes are functioning normally.