How to Remove and Replace a Brake Caliper on 2007 Dodge Caliber?

First, hold the brake pedal down about an inch with a brake pedal holding tool so that the master cylinder remains isolated after you separate the brake lines. After that, raise the vehicle and take off the three wheel retaining nuts, then remove the rear tire and wheel. Release the nut on the brake tube at the rear flex hose, then remove the clip and pull the flex hose off of the trailing link mounted bracket. Loosen and take the brake flex hose off the brake caliper. The top and bottom positions can change; if so, the special sleeve bolt may be found either above or below the other bolt. Be sure to place the bolts in the same spots to prevent NVH from occurring. Removing the two pin bolts allows you to slide and take off the disc brake caliper along with the outboard brake pad, off the rotor, inboard brake pad and disc brake adapter bracket. Ultimately, push on the brake pad retaining clip to expose the handle of the clip and slide the outboard brake pad off the caliper.

OEM 2007 Dodge Caliber Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Calipers found

View related parts
2007 Dodge Caliber Caliper, Rear Passenger Side Part Number: 5191268AA
$85.72 MSRP: $129.00
You Save: $43.28 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Right; Caliper Assembly Disc Brake Rear; Brake Caliper
- Position: Rear Passenger Side
- Item Weight: 4.30 Pounds
- Item Dimensions: 9.5 x 7.6 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191268AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Dodge Caliber Caliper, Front Driver Side Part Number: 5191239AA
$113.04 MSRP: $171.00
You Save: $57.96 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Left; Caliper Assembly Disc Brake Front; Brake Caliper
- Position: Front Driver Side
- Item Weight: 8.00 Pounds
- Item Dimensions: 9.5 x 7.1 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191239AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Dodge Caliber Caliper, Rear Driver Side Part Number: 5191267AA
$85.72 MSRP: $129.00
You Save: $43.28 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left; Caliper Assembly Disc Brake Rear; Brake Caliper
- Position: Rear Driver Side
- Item Weight: 4.00 Pounds
- Item Dimensions: 10.1 x 7.2 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191267AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Dodge Caliber Caliper, Front Passenger Side Part Number: 5191238AA
$130.02 MSRP: $181.00
You Save: $50.98 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Right; Caliper Assembly Disc Brake Front; Brake Caliper
- Position: Front Passenger Side
- Item Weight: 8.10 Pounds
- Item Dimensions: 9.3 x 7.4 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191238AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Dodge Caliber Caliper Part Number: 68033077AA
Product Specifications
- Other Name: Caliper - Disc Brake; Brake Caliper; Caliper Assembly Disc Brake Rear
- Item Weight: 4.50 Pounds
- Item Dimensions: 10.0 x 7.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68033077AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- R/T, SE, SRT-4, SXT | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Dodge Caliber Caliper Part Number: 68033076AA
Product Specifications
- Other Name: Caliper - Disc Brake; Brake Caliper; Caliper Assembly Disc Brake Rear
- Item Weight: 4.70 Pounds
- Item Dimensions: 10.3 x 7.5 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68033076AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- R/T, SE, SRT-4, SXT | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2007 Dodge Caliber Brake Caliper Parts and Q&A

Q: How to Remove and Replace a Brake Caliper on 2007 Dodge Caliber?
A: First, hold the brake pedal down about an inch with a brake pedal holding tool so that the master cylinder remains isolated after you separate the brake lines. After that, raise the vehicle and take off the three wheel retaining nuts, then remove the rear tire and wheel. Release the nut on the brake tube at the rear flex hose, then remove the clip and pull the flex hose off of the trailing link mounted bracket. Loosen and take the brake flex hose off the brake caliper. The top and bottom positions can change; if so, the special sleeve bolt may be found either above or below the other bolt. Be sure to place the bolts in the same spots to prevent NVH from occurring. Removing the two pin bolts allows you to slide and take off the disc brake caliper along with the outboard brake pad, off the rotor, inboard brake pad and disc brake adapter bracket. Ultimately, push on the brake pad retaining clip to expose the handle of the clip and slide the outboard brake pad off the caliper.