How to Safely Service an Air Bag Sensor on 2007 Dodge Dakota?

If you are servicing the side impact sensor, turn off the supplemental restraint system by unattaching and insulating the negative battery wire, then wait two minutes for its capacitor to empty. Do not hit or drop the side impact sensor, since this may cause problems; if it is dropped, it will need to be changed. Slide the sensor to the floor beneath the right or left front seat riser and connect the body wire harness connector to the sensor connector receptacle. Scientists carefully position the sensor on the floor panel, so the arrow on the sensor points toward the car's outer side and the anti-rotation pin fits into the center hole. Bolt the sensor to the inner B-pillar using two screws and tighten them to 8 Nm (75 in. lbs.). Lay the floor carpet back on the sensor and attach the other side of the scuff plate trim to the opening of the front door. Link the battery's negative terminal once the supplemental restraint system verification test has finished after working on any component of the system.

OEM 2007 Dodge Dakota Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Air Bag Sensors found

View related parts
2007 Dodge Dakota Impact Sensor, Front Part Number: 4671779AC
$48.02 MSRP: $103.00
You Save: $54.98 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Center, Front; Air Bag Sensor; Front Impact Sensor; Side Impact Sensor; Airbag Impact Sensor.
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4671779AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Dakota Submodels:
- Base, Laramie, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus | 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2007 Dodge Dakota Impact Sensor, Front Part Number: 4896173AA
$189.21 MSRP: $279.00
You Save: $89.79 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Sensor Side Airbag Impact; Sensor Impact
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896173AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2007 Dodge Dakota Impact Sensor, Front Part Number: 4896059AA
Product Specifications
- Other Name: Sensor - Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor; Sensor; Sensor Air Bag
- Position: Front
- Replaces: 4896023AA, 4686957AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.5 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896059AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Dakota Submodels:
- Base, Big Horn, Laramie, Lone Star, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS

2007 Dodge Dakota Air Bag Sensor Parts and Q&A

Q: How to Safely Service an Air Bag Sensor on 2007 Dodge Dakota?
A: If you are servicing the side impact sensor, turn off the supplemental restraint system by unattaching and insulating the negative battery wire, then wait two minutes for its capacitor to empty. Do not hit or drop the side impact sensor, since this may cause problems; if it is dropped, it will need to be changed. Slide the sensor to the floor beneath the right or left front seat riser and connect the body wire harness connector to the sensor connector receptacle. Scientists carefully position the sensor on the floor panel, so the arrow on the sensor points toward the car's outer side and the anti-rotation pin fits into the center hole. Bolt the sensor to the inner B-pillar using two screws and tighten them to 8 Nm (75 in. lbs.). Lay the floor carpet back on the sensor and attach the other side of the scuff plate trim to the opening of the front door. Link the battery's negative terminal once the supplemental restraint system verification test has finished after working on any component of the system.