How to Install a Blower Motor Resistor in the Rear HVAC System on 2007 Dodge Durango?

Secure the rear blower motor resistor in the rear HVAC housing with the screw until you reach 2 Nm (17 in. lbs.). After that, connect the rear HVAC wire connector to the rear blower motor resistor, fit the right rear quarter interior trim panel and then plug back the negative battery cable.

OEM 2007 Dodge Durango Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Blower Motor Resistors found

View related parts
2007 Dodge Durango Control Module, Front Part Number: 68317103AA
$122.65 MSRP: $184.00
You Save: $61.35 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Power; HVAC Blower Motor Control Module; Front Control Module; Blower Motor Regulator; Module; Resistor
- Position: Front
- Replaces: 5143824AA, 5061587AA, 5179985AA, 4596304AC, 4596304AB
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.2 x 5.0 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68317103AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2007 Dodge Durango Resistor, Front Part Number: 5061575AA
$57.98 MSRP: $86.70
You Save: $28.72 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor, Front; HVAC Blower Motor Regulator; Resistor Blower Motor; HVAC Blower Motor Resistor; Blower Motor Resistor
- Position: Front
- Replaces: 4885635AC, 5174618AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.6 x 3.5 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5061575AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2007 Dodge Durango Blower Motor Resistor, Rear Part Number: 5019639AA
$46.35 MSRP: $99.55
You Save: $53.20 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor, Rear; Resistor; Resistor Blower Motor
- Position: Rear
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.5 x 6.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5019639AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Durango Submodels:
- Adventurer, Base, Limited, Limited Hybrid, R/T, SE, SLT, SLT Plus, ST, SXT, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS

2007 Dodge Durango Blower Motor Resistor Parts and Q&A

Q: How to Install a Blower Motor Resistor in the Rear HVAC System on 2007 Dodge Durango?
A: Secure the rear blower motor resistor in the rear HVAC housing with the screw until you reach 2 Nm (17 in. lbs.). After that, connect the rear HVAC wire connector to the rear blower motor resistor, fit the right rear quarter interior trim panel and then plug back the negative battery cable.