How to Install a Knock Sensor on a 3.7L Engine on 2007 Dodge Durango?

The first step is to tell which sensor is left, by looking for its label (LEFT) and its larger bolt head, so that there won't be any mix-up during installation. Fully clean the knock sensor mounting areas first, then put the sensors into the cylinder block. Prevent damage to the knock sensor or spark control by avoiding very tight or loose sensor mounting bolts; apply 15 ± 2 ft. lbs. (20 Nm) (176 in. lbs) torque which isn't a lot for a 8 mm bolt. Remember that the foam strip aids in assembling; it should not be considered a sealant, so do not glue or add any special threads to the bolts. Tighten the mounting bolts after that, attach the knock sensor wiring harness to the rear of the intake manifold and then fit the intake manifold in place.

OEM 2007 Dodge Durango Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Knock Sensors found

View related parts
2007 Dodge Durango Knock Sensor Part Number: 5033316AB
$128.23 MSRP: $194.00
You Save: $65.77 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; MAP Sensor; Sensor Knock
- Replaces: 5033316AA, 56028563AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 1.3 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5033316AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Durango Submodels:
- Adventurer, Citadel, Crew, GT, Limited, Limited Hybrid, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, SE, SLT, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, ST, SXT, Special Service | 5.7L V8, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
2007 Dodge Durango Knock Sensor Part Number: 56041677AB
$103.47 MSRP: $157.00
You Save: $53.53 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; Map Sensor; Sensor Knock
- Item Weight: 0.90 Pounds
- Item Dimensions: 1.8 x 3.5 x 24.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041677AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2007 Dodge Durango Knock Sensor Part Number: 56041679AC
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; Map Sensor; Sensor Knock
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.0 x 3.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041679AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Durango Submodels:
- SLT, ST, SXT | 6 Cyl 3.7 L GAS

2007 Dodge Durango Knock Sensor Parts and Q&A

Q: How to Install a Knock Sensor on a 3.7L Engine on 2007 Dodge Durango?
A: The first step is to tell which sensor is left, by looking for its label (LEFT) and its larger bolt head, so that there won't be any mix-up during installation. Fully clean the knock sensor mounting areas first, then put the sensors into the cylinder block. Prevent damage to the knock sensor or spark control by avoiding very tight or loose sensor mounting bolts; apply 15 ± 2 ft. lbs. (20 Nm) (176 in. lbs) torque which isn't a lot for a 8 mm bolt. Remember that the foam strip aids in assembling; it should not be considered a sealant, so do not glue or add any special threads to the bolts. Tighten the mounting bolts after that, attach the knock sensor wiring harness to the rear of the intake manifold and then fit the intake manifold in place.