How to Install a Timing Cover with Proper Sealing and Repair Techniques on 2007 Dodge Sprinter 2500?

Wipe off oil and dirt from the upper left front cover sealing surface before fitting on the timing cover. Using Loctite 7200 or another same-type sealant, place a bead 1 mm (+0.5 mm) wide by 1 mm high on the left front upper cover sealing surface. The cover should be fastened on within 10 minutes after applying the compound. After that, fit the upper right front cover in place and tighten the bolts holding it there to 9 Nm (80 in. lbs.). Put the engine harness in position and join the camshaft position sensor connectors as needed. First, install the appropriate air control valve gasket, next add the air control valve and hold the bolts in place while tightening them to 14 Nm (124 in. lbs.). Now fit the air control valve air tube and connect everything together, along with the air pump and engine cover bracket. Tighten the bolts to 9 Nm. Then, run the remote connector to the ground and fix the engine cover into place.

OEM 2007 Dodge Sprinter 2500 Timing Cover

Engine Timing Cover

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Timing Covers found

View related parts
2007 Dodge Sprinter 2500 Timing Cover Part Number: 68164018AA
$193.55 MSRP: $307.00
You Save: $113.45 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover - Timing Case; Engine Timing Cover; Front Cover
- Replaces: 5175337AA, 68042699AA, 68054910AA
- Item Weight: 3.20 Pounds
- Item Dimensions: 11.7 x 12.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68164018AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 2500 Submodels:
- Base | 3.0L V6, 6 Cyl 3.0 L DIESEL
View related parts
2007 Dodge Sprinter 2500 Front Cover Part Number: 68005682AA
$7.71 MSRP: $9.77
You Save: $2.06 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap - Timing Belt; Timing Cover; Cover Timing Belt
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68005682AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Dodge Sprinter 2500 Submodels:
- Base | 6 Cyl 3.5 L GAS
View related parts
2007 Dodge Sprinter 2500 Front Cover Part Number: 68005647AA
Product Specifications
- Other Name: Cap - Timing Belt; Timing Cover; Cover Timing Belt
- Item Weight: 2.20 Pounds
- Item Dimensions: 9.9 x 9.5 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68005647AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 2500 Submodels:
- Base | 6 Cyl 3.5 L GAS
View related parts
2007 Dodge Sprinter 2500 Timing Cover Part Number: 68034957AA
Product Specifications
- Other Name: Cover - Timing Case; Engine Timing Cover
- Replaces: 68013873AA
- Item Weight: 18.50 Pounds
- Item Dimensions: 22.9 x 21.1 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68034957AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 2500 Submodels:
- Base | 3.5L V6, 6 Cyl 3.5 L GAS

2007 Dodge Sprinter 2500 Timing Cover Parts and Q&A

Q: How to Install a Timing Cover with Proper Sealing and Repair Techniques on 2007 Dodge Sprinter 2500?
A: Wipe off oil and dirt from the upper left front cover sealing surface before fitting on the timing cover. Using Loctite 7200 or another same-type sealant, place a bead 1 mm (+0.5 mm) wide by 1 mm high on the left front upper cover sealing surface. The cover should be fastened on within 10 minutes after applying the compound. After that, fit the upper right front cover in place and tighten the bolts holding it there to 9 Nm (80 in. lbs.). Put the engine harness in position and join the camshaft position sensor connectors as needed. First, install the appropriate air control valve gasket, next add the air control valve and hold the bolts in place while tightening them to 14 Nm (124 in. lbs.). Now fit the air control valve air tube and connect everything together, along with the air pump and engine cover bracket. Tighten the bolts to 9 Nm. Then, run the remote connector to the ground and fix the engine cover into place.