How to Maintain and Fix a Harmonic Balancer and Crankshaft Pulley on 2007 Jeep Commander?

Always begin by removing the cable from the battery's negative terminal before handling the harmonic balancer and crankshaft pulley. After that, take off the radiator fan and the accessory drive belt. Following that, take the crankshaft harmonic balancer bolt out. Use Special Tools 8513 Insert and 1026 Three Jaw Puller to remove the harmonic balancer at the end.

OEM 2007 Jeep Commander Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Harmonic Balancers found

View related parts
2007 Jeep Commander Vibration Damper Part Number: 4792815AB
Product Specifications
- Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Pulley; Damper Crankshaft
- Item Weight: 7.70 Pounds
- Item Dimensions: 8.2 x 8.2 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792815AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- Limited, Overland | 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Vibration Damper Part Number: 53020689AB
Product Specifications
- Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Pulley; Damper Crankshaft
- Item Weight: 10.90 Pounds
- Item Dimensions: 10.5 x 10.4 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53020689AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2007 Jeep Commander Harmonic Balancer Parts and Q&A

Q: How to Maintain and Fix a Harmonic Balancer and Crankshaft Pulley on 2007 Jeep Commander?
A: Always begin by removing the cable from the battery's negative terminal before handling the harmonic balancer and crankshaft pulley. After that, take off the radiator fan and the accessory drive belt. Following that, take the crankshaft harmonic balancer bolt out. Use Special Tools 8513 Insert and 1026 Three Jaw Puller to remove the harmonic balancer at the end.