How to Service the Relay Block on 2007 Jeep Commander?

First, disconnect and isolate the battery negative cable to turn off the air bag system and after two minutes, the air bag system capacitor will be discharged. Begin the process by removing the upper edge of the opening cover which disengages the clips, then remove and store the screw under the opening cover. Disconnect the bottom right side Relay Block connectors, then get to the back of the Relay Block and pull the top right side Relay Block plug out. Take out the screws attached to the Relay Block on the bracket and after that, gently loosen the two top snaps that link the Relay Block to the bracket. Pull down on the top of the Relay Block to pop the retaining tabs out of the bracket. To finish, let the Relay Block drop out the opening at the bottom by removing the fastening once the instrument panel is open.

OEM 2007 Jeep Commander Relay Block

Relay Fuse Box

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Relay Blocks found

View related parts
2007 Jeep Commander Block Part Number: 4692164AD
Product Specifications
- SKU: 4692164AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Jeep Commander Submodels:
- Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Junction Block Part Number: 56049916AA
Product Specifications
- Other Name: Block - Relay; Junction Boxes; Fuse Box; Junction Block Relay
- Item Weight: 2.80 Pounds
- Item Dimensions: 10.5 x 6.4 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56049916AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Junction Block Part Number: 56049915AA
Product Specifications
- Other Name: Block - Relay; Junction Boxes; Relay Boxes; Fuse Box; Junction Block Relay
- Item Weight: 2.50 Pounds
- Item Dimensions: 10.6 x 7.2 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56049915AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2007 Jeep Commander Relay Block Parts and Q&A

Q: How to Service the Relay Block on 2007 Jeep Commander?
A: First, disconnect and isolate the battery negative cable to turn off the air bag system and after two minutes, the air bag system capacitor will be discharged. Begin the process by removing the upper edge of the opening cover which disengages the clips, then remove and store the screw under the opening cover. Disconnect the bottom right side Relay Block connectors, then get to the back of the Relay Block and pull the top right side Relay Block plug out. Take out the screws attached to the Relay Block on the bracket and after that, gently loosen the two top snaps that link the Relay Block to the bracket. Pull down on the top of the Relay Block to pop the retaining tabs out of the bracket. To finish, let the Relay Block drop out the opening at the bottom by removing the fastening once the instrument panel is open.