How to Maintain Your Seat Heater on 2007 Jeep Commander?

Before beginning any work on the seat heater, first disconnect and shut off the battery negative cable. Afterward, take out the seat cushion or the seat back trim cover if it's removable. Remove the electrical wires from the heated seat you wish to disable. Then, locate the wires going to the inoperative heating element and cut them will flush against the old element. Removing the factory supplied heating elements from the seat or back cushion will cause the part to become damaged permanently. The dynamic heating element should be installed directly on the old and defective piece.

OEM 2007 Jeep Commander Seat Heater

Seat Warmer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Seat Heaters found

View related parts
2007 Jeep Commander Seat Cushion Heater Part Number: 5183711AA
Product Specifications
- Other Name: Pad - Heater; Seat Heater Pad; Element; Pad Heater Cushion; Seat Heater
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5183711AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Jeep Commander Submodels:
- Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Seat Back Pad, Front Part Number: 5000022AB
Product Specifications
- Other Name: Pad - Seat Back; Seat Heater Pad, Front, Front Upper; Seat Back Heater; Heated Pad for back cushion.
- Position: Front
- Replaces: 5000022AA
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.4 x 6.3 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5000022AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2007 Jeep Commander Seat Heater Parts and Q&A

Q: How to Maintain Your Seat Heater on 2007 Jeep Commander?
A: Before beginning any work on the seat heater, first disconnect and shut off the battery negative cable. Afterward, take out the seat cushion or the seat back trim cover if it's removable. Remove the electrical wires from the heated seat you wish to disable. Then, locate the wires going to the inoperative heating element and cut them will flush against the old element. Removing the factory supplied heating elements from the seat or back cushion will cause the part to become damaged permanently. The dynamic heating element should be installed directly on the old and defective piece.