How to Maintain and Fix a Steering Column Cover on 2007 Jeep Commander?

Begin by removing power from the steering column cover by disconnecting and isolating the battery negative cable. After that, unscrew the three bolts holding down the driver's side panel and disconnect it from the car. Use a trim stick C-4755 or something similar, pull up the sliders above, lower the cover and then disconnect the hinges at the bottom. Then lower the cover to the carpet, place your hand below the edge and pull up and rearward to release the lower pins.

OEM 2007 Jeep Commander Steering Column Cover

Steering Column Cover Bezel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Steering Column Covers found

View related parts
2007 Jeep Commander Shroud Part Number: 5KB11ZJ8AD
Product Specifications
- Other Name: Shroud - Steering Column; Shroud Steering Column
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5KB11ZJ8AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Shroud, Slate Gray Part Number: 5KB11XDVAD
Product Specifications
- Other Name: Shroud - Steering Column; Shroud Steering Column
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5KB11XDVAD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Lower Column Cover, Gray Part Number: 5HS93BD1AI
Product Specifications
- Other Name: Cover - Instrument Panel; Instrument Panel Knee Bolster; Upper Column Cover
- Replaces: 5HS93BD1AH, 5HS93BD1AE, 5HS93BD1AF, 5HS93BD1AG
- Item Weight: 3.90 Pounds
- Item Dimensions: 25.3 x 14.7 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5HS93BD1AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Lower Column Cover Part Number: 5HS93ZJ3AI
Product Specifications
- Other Name: Cover - Instrument Panel; Instrument Panel Knee Bolster; Upper Column Cover
- Replaces: 5HS93ZJ3AG, 5HS93ZJ3AF, 5HS93ZJ3AE, 5HS93ZJ3AH
- Item Weight: 4.00 Pounds
- Item Dimensions: 25.0 x 14.2 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5HS93ZJ3AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Lower Column Cover, Gray Part Number: 5HS93BD5AI
Product Specifications
- Other Name: Cover - Instrument Panel; Instrument Panel Knee Bolster; Upper Column Cover
- Replaces: 5HS93BD5AF, 5HS93BD5AG, 5HS93BD5AH, 5HS93BD5AE
- Item Weight: 4.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5HS93BD5AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2007 Jeep Commander Steering Column Cover Parts and Q&A

Q: How to Maintain and Fix a Steering Column Cover on 2007 Jeep Commander?
A: Begin by removing power from the steering column cover by disconnecting and isolating the battery negative cable. After that, unscrew the three bolts holding down the driver's side panel and disconnect it from the car. Use a trim stick C-4755 or something similar, pull up the sliders above, lower the cover and then disconnect the hinges at the bottom. Then lower the cover to the carpet, place your hand below the edge and pull up and rearward to release the lower pins.