How to Properly Install and Adjust a Rear Wiper Arm on 2007 Jeep Grand Cherokee?

You should park the rear wiper motor by switching the ignition to On and turning the rear wiper switch off before installing the arm. If you see that the wiper motor is moving its shaft, let it stop before turning the ignition switch back to Off. While in park, the wiper arm on the back must be lined up with the shaft where the motor pivots. Set the rear wiper arm on the liftgate, so that the support arm rests on the park ramp and the widest end of the arm's pivot over the rear wiper motor shaft. Place the tapered hole over the output shaft, install and tighten the securing nut to 10 Nm (86 in. lbs.). Use a cloth to moisten the liftgate glass and operate the rear wiper, after that switch the rear wiper to Off and look at the wiper arm's position on the park ramp, fixing it as required. Roll the plastic cap over the end of the rear wiper arm and push down firmly until everything snaps together.

OEM 2007 Jeep Grand Cherokee Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Wiper Arms found

View related parts
2007 Jeep Grand Cherokee Wiper Arm, Rear Part Number: 5139836AB
$70.64 MSRP: $107.00
You Save: $36.36 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Rear Wiper; Back Glass Wiper Arm; Rear Arm; Arm Liftgate Wiper; Arm Rear Wiper
- Position: Rear
- Item Weight: 0.80 Pounds
- Item Dimensions: 1.9 x 2.6 x 17.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5139836AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2007 Jeep Grand Cherokee Wiper Motor Assembly Part Number: 55156313AB
Product Specifications
- Other Name: Crank Arm - Wiper; Windshield Wiper Motor; Front Motor; Module Wiper; Wiper Motor
- Item Weight: 9.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55156313AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2007 Jeep Grand Cherokee Wiper Arm, Front Passenger Side Part Number: 5143534AA
Product Specifications
- Other Name: Arm Wiper - Front Wiper; Windshield Wiper Arm, Right; Front Arm; Arm Front Wiper; Arm Wiper
- Position: Front Passenger Side
- Item Weight: 1.90 Pounds
- Item Dimensions: 26.7 x 3.7 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5143534AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2007 Jeep Grand Cherokee Wiper Arm, Front Driver Side Part Number: 5143533AA
Product Specifications
- Other Name: Arm Wiper - Front Wiper; Windshield Wiper Arm, Left; Front Arm; Arm Front Wiper; Arm Wiper
- Position: Front Driver Side
- Item Weight: 1.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5143533AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2007 Jeep Grand Cherokee Wiper Arm Parts and Q&A

Q: How to Properly Install and Adjust a Rear Wiper Arm on 2007 Jeep Grand Cherokee?
A: You should park the rear wiper motor by switching the ignition to On and turning the rear wiper switch off before installing the arm. If you see that the wiper motor is moving its shaft, let it stop before turning the ignition switch back to Off. While in park, the wiper arm on the back must be lined up with the shaft where the motor pivots. Set the rear wiper arm on the liftgate, so that the support arm rests on the park ramp and the widest end of the arm's pivot over the rear wiper motor shaft. Place the tapered hole over the output shaft, install and tighten the securing nut to 10 Nm (86 in. lbs.). Use a cloth to moisten the liftgate glass and operate the rear wiper, after that switch the rear wiper to Off and look at the wiper arm's position on the park ramp, fixing it as required. Roll the plastic cap over the end of the rear wiper arm and push down firmly until everything snaps together.