How to Maintain the Camshaft Position Sensor on a 3.8L Engine on 2007 Jeep Wrangler?

Disconnect the negative battery cable before handling the Camshaft Position Sensor in a 3.8L engine. After that, remove the electrical connectors. Take out the bolt that holds the sensor and rotate the sensor as you pull it, being sure to take off the O-ring under it. The CMP is bolted up front and is wired to the engine through a pigtail harness.

OEM 2007 Jeep Wrangler Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2007 Jeep Wrangler Camshaft Position Sensor Part Number: 4686353
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Camshaft Positioni Sensor; Camshaft Sensor; Cam Sensor; Sensor D.I.S. Camshaft Reference; Sensor Camshaft
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.6 x 3.4 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4686353
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Wrangler Submodels:
- Rubicon, Sahara, Unlimited Rubicon, Unlimited Sahara, Unlimited X, X | 6 Cyl 3.8 L GAS

2007 Jeep Wrangler Camshaft Position Sensor Parts and Q&A

Q: How to Maintain the Camshaft Position Sensor on a 3.8L Engine on 2007 Jeep Wrangler?
A: Disconnect the negative battery cable before handling the Camshaft Position Sensor in a 3.8L engine. After that, remove the electrical connectors. Take out the bolt that holds the sensor and rotate the sensor as you pull it, being sure to take off the O-ring under it. The CMP is bolted up front and is wired to the engine through a pigtail harness.