How to Install and Reprogram an ABS Control Module for Antilock Brakes on 2007 Jeep Wrangler?

Before installing the Hydraulic Control Assembly for Antilock Brakes, make sure that if you replaced the ABM, you must reprogram it with a scan tool. Installing the HCU/ABM onto the mounting studs comes first. Following that, use mounting nuts and a bolt to secure everything, then tighten them to 11.5 Nm (102 in. lbs.). Secure the brake lines to the HCU and tighten them with a torque of 19 Nm (170 in. lbs.). Press the release to connect the wiring harness to the control module. Install the master cylinder and after that securely connect the negative battery cable back to the battery terminal. Make sure to bleed the ABS brake system after all other steps are done.

OEM 2007 Jeep Wrangler ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Control Modules found

View related parts
2007 Jeep Wrangler Control Module Part Number: 68003363AF
$506.09 MSRP: $764.00
You Save: $257.91 (34%)
ADD TO CART
Product Specifications
- Other Name: Module - ABS; ABS Control Module
- Replaces: 68003363AC, 68003363AE, 68003363AD, 68003363AA, 68003363AB
- Item Weight: 2.40 Pounds
- Item Dimensions: 7.5 x 7.4 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003363AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Wrangler Submodels:
- Rubicon, Sahara, Unlimited Rubicon, Unlimited Sahara, Unlimited X, X | 3.8L V6, 6 Cyl 3.8 L GAS
View related parts
2007 Jeep Wrangler Modulator Valve Part Number: 5179771AA
Product Specifications
- Other Name: Control - Anti-Lock Brake; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit; Hydraulic Unit; Modulator; Control Unit Anti-Lock Brake
- Item Weight: 5.00 Pounds
- Item Dimensions: 7.0 x 7.1 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5179771AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Wrangler Submodels:
- Rubicon, Sahara, Unlimited Rubicon, Unlimited Sahara, Unlimited X, X | 6 Cyl 3.8 L GAS

2007 Jeep Wrangler ABS Control Module Parts and Q&A

Q: How to Install and Reprogram an ABS Control Module for Antilock Brakes on 2007 Jeep Wrangler?
A: Before installing the Hydraulic Control Assembly for Antilock Brakes, make sure that if you replaced the ABM, you must reprogram it with a scan tool. Installing the HCU/ABM onto the mounting studs comes first. Following that, use mounting nuts and a bolt to secure everything, then tighten them to 11.5 Nm (102 in. lbs.). Secure the brake lines to the HCU and tighten them with a torque of 19 Nm (170 in. lbs.). Press the release to connect the wiring harness to the control module. Install the master cylinder and after that securely connect the negative battery cable back to the battery terminal. Make sure to bleed the ABS brake system after all other steps are done.