How to Check and Install a Piston Ring Set on 2008 Chrysler Aspen?

Check ring clearances before reinstalling or installing new rings clean up the cylinder bore and then put the ring in at least 12mm below the bottom. Square the ring using a piston, verify gaps with a feeler gauge and replace rings that are out of spec. Maintain grooves, put rings into position and position gaps.

OEM 2008 Chrysler Aspen Piston Ring Set

Piston Ring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Piston Ring Sets found

View related parts
2008 Chrysler Aspen Piston Rings Part Number: 68031606AA
$51.56 MSRP: $66.45
You Save: $14.89 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ring Set - Piston; Piston Ring; Ring Package Piston Standard Size; Ring Kit Piston Standard
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68031606AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler Aspen Submodels:
- Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2008 Chrysler Aspen Piston Rings Part Number: 5086002AC
$57.87 MSRP: $73.36
You Save: $15.49 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Package Part - Piston; Piston Ring; Ring Package Piston Standard Size, one package for one piston.
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.2 x 5.1 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5086002AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited | 8 Cyl 5.7 L GAS

2008 Chrysler Aspen Piston Ring Set Parts and Q&A

Q: How to Check and Install a Piston Ring Set on 2008 Chrysler Aspen?
A: Check ring clearances before reinstalling or installing new rings clean up the cylinder bore and then put the ring in at least 12mm below the bottom. Square the ring using a piston, verify gaps with a feeler gauge and replace rings that are out of spec. Maintain grooves, put rings into position and position gaps.