How to Service and Repair the Rear Blend Door Actuator on 2008 Chrysler Pacifica?

Before working on the air door actuator/motor in the rear controls, open the front console cover in the middle. After that, disconnect and isolate the negative battery cable. After that, take out the body wire harness connector (4) from the rear mode door actuator (1). In the end, remove the two screws (3) holding the mode door actuator to the rear blower motor housing (2) and pull out the actuator.

OEM 2008 Chrysler Pacifica Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blend Door Actuator found

View related parts
2008 Chrysler Pacifica Actuator, Rear Part Number: 4885465AA
Product Specifications
- Other Name: Actuator - A/C And Heater; HVAC Air Inlet Door Actuator, Rear; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator; Actuator A/C And Heater
- Position: Rear
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.7 x 3.3 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4885465AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Chrysler Pacifica Blend Door Actuator Parts and Q&A

Q: How to Service and Repair the Rear Blend Door Actuator on 2008 Chrysler Pacifica?
A: Before working on the air door actuator/motor in the rear controls, open the front console cover in the middle. After that, disconnect and isolate the negative battery cable. After that, take out the body wire harness connector (4) from the rear mode door actuator (1). In the end, remove the two screws (3) holding the mode door actuator to the rear blower motor housing (2) and pull out the actuator.