How to Extract the Evaporator Core from the HVAC Housing on 2008 Chrysler Pacifica?

The initial step to remove the evaporator core is taking out the HVAC housing. After that, separate the HVAC housing to reach the A/C evaporator. Take off the thirteen screws connecting the upper HVAC housing to the lower HVAC housing and separate the two housing halves. Lastly, release the rubber flange seal and get the A/C evaporator and insulator out of the HVAC housing by carefully lifting them from below.

OEM 2008 Chrysler Pacifica Evaporator

A/C Evaporator Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Evaporator found

View related parts
2008 Chrysler Pacifica Evaporator Core, Front Part Number: 5019217AG
$544.41 MSRP: $729.00
You Save: $184.59 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Evaporatr - A/C Evaporator Core, Front; Repair Kit; Evaporator.
- Position: Front
- Replaces: 5019217AE, 5019217AF, V9900021AB, 5019217AD, 68024435AA, 5019217AC, 68024436AA, V9900021, 5019217AB
- Item Weight: 4.40 Pounds
- Item Dimensions: 7.7 x 14.3 x 20.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5019217AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 3.5L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Chrysler Pacifica Evaporator Parts and Q&A

Q: How to Extract the Evaporator Core from the HVAC Housing on 2008 Chrysler Pacifica?
A: The initial step to remove the evaporator core is taking out the HVAC housing. After that, separate the HVAC housing to reach the A/C evaporator. Take off the thirteen screws connecting the upper HVAC housing to the lower HVAC housing and separate the two housing halves. Lastly, release the rubber flange seal and get the A/C evaporator and insulator out of the HVAC housing by carefully lifting them from below.