How to Remove Car Speakers from Various Locations on 2008 Chrysler Pacifica?

Before you remove the front door speaker, disconnect the negative battery terminal, remove the exterior door panel, undo the mounting fasteners and disconnect the connector for the electrical harness. To remove the speaker for the instrument panel, turn off the car's battery, detach the black cable that connects to the negative terminal, take the instrument panel grill off, undo the mounting bolts and unplug the electrical connector. Shut off the negative battery terminal, remove the rear door panel, take out the fasteners, remove the electrical connector and the speaker will come off. For the subwoofer, pull off and isolate one end of the negative battery cable, gently bend at the trim stick (Special tool C-4755) or similar tool under the speaker grille and take out the rear speaker. When removing the tweeter, pull the negative battery cable, take out the front door panel covering, remove the attachments and then remove the harness wire.

OEM 2008 Chrysler Pacifica Car Speakers

Audio Speakers

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Car Speakers found

View related parts
2008 Chrysler Pacifica Front Driver Speaker, Rear Part Number: 5064968AA
Product Specifications
- Other Name: Speaker H; Speaker, Front, Rear; Rear Driver Speaker; Speaker
- Position: Rear
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5064968AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler Pacifica Submodels:
- LX, Limited, Touring | 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Front Driver Speaker, Rear Part Number: 5064966AA
Product Specifications
- Other Name: Speaker; Speaker, Front, Rear; Rear Driver Speaker
- Position: Rear
- Item Weight: 2.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5064966AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- LX, Limited, Touring | 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Tweeter Part Number: 5064965AA
Product Specifications
- Other Name: Speaker - Tweeter; Speaker Tweeter
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5064965AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler Pacifica Submodels:
- LX, Limited, Touring | 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Tweeter Part Number: 4685965AC
Product Specifications
- Other Name: Speaker - Tweeter; Speaker Tweeter
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4685965AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Woofer Part Number: 4685972AB
Product Specifications
- Other Name: Speaker - Sub Woofer; Speaker; Speaker Sub Woofer
- Item Weight: 5.70 Pounds
- Item Dimensions: 10.7 x 10.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4685972AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Chrysler Pacifica Car Speakers Parts and Q&A

Q: How to Remove Car Speakers from Various Locations on 2008 Chrysler Pacifica?
A: Before you remove the front door speaker, disconnect the negative battery terminal, remove the exterior door panel, undo the mounting fasteners and disconnect the connector for the electrical harness. To remove the speaker for the instrument panel, turn off the car's battery, detach the black cable that connects to the negative terminal, take the instrument panel grill off, undo the mounting bolts and unplug the electrical connector. Shut off the negative battery terminal, remove the rear door panel, take out the fasteners, remove the electrical connector and the speaker will come off. For the subwoofer, pull off and isolate one end of the negative battery cable, gently bend at the trim stick (Special tool C-4755) or similar tool under the speaker grille and take out the rear speaker. When removing the tweeter, pull the negative battery cable, take out the front door panel covering, remove the attachments and then remove the harness wire.