How to Ensure Proper Installation of a Steering Wheel on 2008 Chrysler Sebring?

Before installing the steering wheel, check that the steering is right in the center and the signal stalk is in the center as well. Don't push the steering wheel onto the part of the shaft inside the steering wheel. Match the splines at the base of the steering wheel and shaft, then push the wheel on until the Clock Spring lines up with the wheel's back and stays free. Secure the steering wheel with the retaining bolt (2) tightened to 50 Nm (37 ft. lbs.). After removing the puller, reattach the speed control screw (3) and then plug in the wiring connector (2) to the Clock Spring. Don't connect the battery negative cable until after installing the driver air bag (3), because the air bag System Test has to be done before the battery is connected. Reinstall the battery after the air bag System Test using the same steps and test the vehicle systems as usual.

OEM 2008 Chrysler Sebring Steering Wheel

Navigation Steering Wheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Steering Wheels found

View related parts
2008 Chrysler Sebring Steering Wheel Part Number: 1FS561D1AB
Product Specifications
- Other Name: Wheel - Steering; Wheel Steering
- Replaces: 1FS561D1AA
- Item Weight: 5.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1FS561D1AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Chrysler Sebring Steering Wheel Part Number: 1GA611J8AA
Product Specifications
- Other Name: Wheel - Steering; Wheel Steering
- Item Weight: 5.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1GA611J8AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Chrysler Sebring Steering Wheel, Dark Gray Part Number: 1GP17XDHAA
Product Specifications
- Other Name: Wheel - Steering; Wheel Steering
- Item Weight: 5.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1GP17XDHAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Chrysler Sebring Steering Wheel, Beige Part Number: 1GP141K5AA
Product Specifications
- Other Name: Wheel - Steering; Wheel Steering
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1GP141K5AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Chrysler Sebring Steering Wheel, Slate Gray Part Number: 1GP141DHAA
Product Specifications
- Other Name: Wheel - Steering; Wheel Steering
- Item Weight: 5.40 Pounds
- Item Dimensions: 15.5 x 15.9 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1GP141DHAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Chrysler Sebring Steering Wheel, Slate Gray Part Number: 1GA611DHAA
Product Specifications
- Other Name: Wheel - Steering; Wheel Steering
- Item Weight: 4.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1GA611DHAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Chrysler Sebring Steering Wheel Part Number: 1GA601J8AB
Product Specifications
- Other Name: Wheel - Steering; Wheel Steering
- Replaces: 1GA601J8AA
- Item Weight: 5.60 Pounds
- Item Dimensions: 18.0 x 17.6 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1GA601J8AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Chrysler Sebring Steering Wheel, Slate Gray Part Number: 1GA601DHAB
Product Specifications
- Other Name: Wheel - Steering; Wheel Steering
- Replaces: 1GA601DHAA
- Item Weight: 5.50 Pounds
- Item Dimensions: 18.5 x 17.8 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1GA601DHAB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2008 Chrysler Sebring Steering Wheel Parts and Q&A

Q: How to Ensure Proper Installation of a Steering Wheel on 2008 Chrysler Sebring?
A: Before installing the steering wheel, check that the steering is right in the center and the signal stalk is in the center as well. Don't push the steering wheel onto the part of the shaft inside the steering wheel. Match the splines at the base of the steering wheel and shaft, then push the wheel on until the Clock Spring lines up with the wheel's back and stays free. Secure the steering wheel with the retaining bolt (2) tightened to 50 Nm (37 ft. lbs.). After removing the puller, reattach the speed control screw (3) and then plug in the wiring connector (2) to the Clock Spring. Don't connect the battery negative cable until after installing the driver air bag (3), because the air bag System Test has to be done before the battery is connected. Reinstall the battery after the air bag System Test using the same steps and test the vehicle systems as usual.