How to Install a Power Steering Pump on a 2.0L/2.4L Engine on 2008 Chrysler Sebring?

To fit the power steering pump, first wipe the open power hose end and pump area with a lint-free towel, replace any old O-rings with new ones and lubricate them with fresh power steering fluid. Put the pump into position, then slide three bolts through the pulley openings and tighten them so they read 26 Nm (19 ft. lbs.) on your torque wrench. Following that, attach the drive belt, then place the supply hose on the pump and fasten it at both ends with hose clamps. Join the pump's pressure port to the pressure hose and tighten the tube nut; set the torque at 32 Nm (24 ft. lbs.) Install the bracket screw for the pressure hose routing into the engine mount, hand-tighten to 18 ft. lbs. Work off the car to add power steering fluid, look for any leaks and then put on the engine appearance cover last.

OEM 2008 Chrysler Sebring Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Power Steering Pumps found

View related parts
2008 Chrysler Sebring Power Steering Pump Part Number: 5151016AE
$250.20 MSRP: $379.00
You Save: $128.80 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Power Steering; Pump Power Steering
- Replaces: 5151016AD, 5151016AB, 5151016AC
- Item Weight: 4.50 Pounds
- Item Dimensions: 7.1 x 7.2 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5151016AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2008 Chrysler Sebring Power Steering Pump Part Number: 4766044AA
Product Specifications
- Other Name: Pump - Power Steering; Pump Power Steering; Pump
- Item Weight: 3.90 Pounds
- Item Dimensions: 7.3 x 7.3 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4766044AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
- Limited | 6 Cyl 3.5 L GAS
View related parts
2008 Chrysler Sebring Power Steering Pump Part Number: 4766041AB
Product Specifications
- Other Name: Pump - Power Steering; Pump Power Steering
- Replaces: 4766041AA
- Item Weight: 4.10 Pounds
- Item Dimensions: 7.2 x 6.1 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4766041AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2008 Chrysler Sebring Power Steering Pump Parts and Q&A

Q: How to Install a Power Steering Pump on a 2.0L/2.4L Engine on 2008 Chrysler Sebring?
A: To fit the power steering pump, first wipe the open power hose end and pump area with a lint-free towel, replace any old O-rings with new ones and lubricate them with fresh power steering fluid. Put the pump into position, then slide three bolts through the pulley openings and tighten them so they read 26 Nm (19 ft. lbs.) on your torque wrench. Following that, attach the drive belt, then place the supply hose on the pump and fasten it at both ends with hose clamps. Join the pump's pressure port to the pressure hose and tighten the tube nut; set the torque at 32 Nm (24 ft. lbs.) Install the bracket screw for the pressure hose routing into the engine mount, hand-tighten to 18 ft. lbs. Work off the car to add power steering fluid, look for any leaks and then put on the engine appearance cover last.