How to service a Power Steering Reservoir on 2008 Chrysler Town & Country?

Before servicing the power steering reservoir, disconnect the negative battery cable and make sure it is not connected. After that, open the power steering reservoir and use a siphon pump to drain the whole tank. Following that, open the air intake reservoir cover. Separate the clamp that holds the return line onto the reservoir and take off the hose. Also, disconnect the clamp on the supply hose and remove that hose as well. Remove the reservoir by sliding it up, after unscrewing the mounting nut that secures it.

OEM 2008 Chrysler Town & Country Power Steering Reservoir

Power Steering Fluid Reservoir Tank

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Reservoir found

View related parts
2008 Chrysler Town & Country Power Steering Pump Reservoir Part Number: 4721497AC
$76.66 MSRP: $172.00
You Save: $95.34 (56%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Power Steering Fluid; Power Steering Reservoir; Reservoir; Reservoir Power Steering Fluid
- Replaces: 4721497AB
- Item Weight: 1.10 Pounds
- Item Dimensions: 6.4 x 7.3 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4721497AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Town & Country Submodels:
- LX, Limited, Touring, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Chrysler Town & Country Power Steering Reservoir Parts and Q&A

Q: How to service a Power Steering Reservoir on 2008 Chrysler Town & Country?
A: Before servicing the power steering reservoir, disconnect the negative battery cable and make sure it is not connected. After that, open the power steering reservoir and use a siphon pump to drain the whole tank. Following that, open the air intake reservoir cover. Separate the clamp that holds the return line onto the reservoir and take off the hose. Also, disconnect the clamp on the supply hose and remove that hose as well. Remove the reservoir by sliding it up, after unscrewing the mounting nut that secures it.