How to Remove the Blower Motor from the Bottom of the Passenger Side HVAC Housing on 2008 Dodge Caliber?

To remove the blower motor from the HVAC housing, disconnect the negative battery cable and, if there is one, remove the silencer. Then, disconnect the instrument panel wire harness to the blower motor. Finally, remove the three screws that hold the blower motor in place and remove the blower motor.

OEM 2008 Dodge Caliber Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

View related parts
2008 Dodge Caliber MOTOR-BLOWER WITH WHEEL Part Number: 5191345AB
$133.69 MSRP: $197.00
You Save: $63.31 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- SKU: 5191345AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2008 Dodge Caliber Blower Motor Parts and Q&A

Q: How to Remove the Blower Motor from the Bottom of the Passenger Side HVAC Housing on 2008 Dodge Caliber?
A: To remove the blower motor from the HVAC housing, disconnect the negative battery cable and, if there is one, remove the silencer. Then, disconnect the instrument panel wire harness to the blower motor. Finally, remove the three screws that hold the blower motor in place and remove the blower motor.