OEM 2008 Dodge Dakota A/C Condenser

2008 Dodge Dakota A/C Condenser Parts and Q&A

• Q: How to Service the A/C Condenser and Adjust the Refrigerant Oil Level on 2008 Dodge Dakota?

  A: Proper servicing of the A/C system means checking and maintaining the level of refrigerant oil to protect against system failure and possible damage to the compressor. If you're only changing the A/C condenser, put in 30 milliliters (1 fluid ounce) of refrigerant oil into the refrigerant system. Whenever you open a refrigerant line, it's important to swap both the O-ring seal and gasket to guard against leaks. First, move the radiator backward and try to fit the A/C condenser into the engine compartment. Hold the four bolts into place and tighten them to 4.5 Nm (40 in-lbs.) while they are in contact with the radiator. Subsequently, put the power steering cooler on the A/C condenser and install its retaining screws firmly. Link the A/C discharge line and the A/C liquid line to the A/C condenser and arrange the cable for the hood latch properly. Replace the upper radiator support and restore the connection for the negative battery wire. Discharge the system of refrigerant and, if you're replacing the A/C condenser, include 30 milliliters (1 fluid ounce) of refrigerant oil. To change several parts, use the Refrigerant Oil Capacities chart to find out the right oil dose. When all else is done, charge up the refrigerant system.