OEM 2007 Dodge Dakota A/C Condenser

2007 Dodge Dakota A/C Condenser Parts and Q&A

• Q: How to Maintain the A/C Condenser to Prevent Compressor Damage on 2007 Dodge Dakota?

  A: During A/C refrigerant servicing, make sure you set the refrigerant oil level so as to prevent damage to the A/C compressor. If you're just changing the condenser, add 30 milliliters (1 fluid ounce) of refrigerant oil that matches what the vehicle's A/C compressor uses. Whenever you open a refrigerant line, be sure to replace all the seals and gaskets to avoid leaks. Put your weight behind the radiator as you move it slowly toward the back and place the A/C condenser inside the engine area. Attach the A/C condenser to the radiator with four bolts and tighten them to 4.5 Nm (40 in. lbs.). After that, fit the power steering cooler onto the A/C condenser and tighten the retaining screws. Join the A/C discharge line and the A/C liquid line to the A/C condenser and make certain the hood latch cable is correctly directed. Install the support bar for your radiator and then connect the negative battery cable again. Evacuate the refrigerant system and then add 30 milliliters (1 fluid ouncer) of refrigerant oil, unless you have changed more parts than the condenser. Afterwards, charge the refrigerant system.