How to Install a Brake Booster on 2008 Dodge Dakota?

With the spacer and gaskets on the booster studs, place the four studs in their cowl panel holes and set the booster on the panel. Install and tighten the four nuts that hold the booster to an engine to 28 Nm (250 in. lbs.). After that, put the booster push rod onto the brake pedal and attach it with the clip. Hook one end of the hose to the vacuum cleaner and the other to the check valve. Once that's done, place and secure the master cylinder, then fill and bleed the brake system.

OEM 2008 Dodge Dakota Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Booster found

View related parts
2008 Dodge Dakota Brake Booster Part Number: 5142651AB
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Booster Assembly; Booster Power Brake
- Replaces: 5142651AA
- Item Weight: 13.70 Pounds
- Item Dimensions: 25.2 x 14.7 x 14.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5142651AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2008 Dodge Dakota Brake Booster Parts and Q&A

Q: How to Install a Brake Booster on 2008 Dodge Dakota?
A: With the spacer and gaskets on the booster studs, place the four studs in their cowl panel holes and set the booster on the panel. Install and tighten the four nuts that hold the booster to an engine to 28 Nm (250 in. lbs.). After that, put the booster push rod onto the brake pedal and attach it with the clip. Hook one end of the hose to the vacuum cleaner and the other to the check valve. Once that's done, place and secure the master cylinder, then fill and bleed the brake system.