How to Remove and Replace a Brake Master Cylinder on 2008 Dodge Dakota?

When changing the Brake Master Cylinder, first check that no tools are near the seals, since using them could cut or tear the seals and allow leaks to appear. Once the new seals are lubricated with clean brake fluid, use only your fingers to put them into place in the cylinder body. After that, set up the reservoir (2) inside the seals and rock it to and fro as you push on top to get it into place. Put in both screws for the reservoir where they should be on the master cylinder and reconnect the switch's connector to its main wire. Once done, clean out the prop rod and begin filling and bleeding the vehicle's brake system.

OEM 2008 Dodge Dakota Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

View related parts
2008 Dodge Dakota Master Cylinder Part Number: 5175103AA
$138.26 MSRP: $209.00
You Save: $70.74 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 2.70 Pounds
- Item Dimensions: 10.4 x 7.4 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5175103AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2008 Dodge Dakota Master Cylinder Part Number: 5183200AA
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 2.90 Pounds
- Item Dimensions: 10.6 x 7.2 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5183200AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2008 Dodge Dakota Brake Master Cylinder Parts and Q&A

Q: How to Remove and Replace a Brake Master Cylinder on 2008 Dodge Dakota?
A: When changing the Brake Master Cylinder, first check that no tools are near the seals, since using them could cut or tear the seals and allow leaks to appear. Once the new seals are lubricated with clean brake fluid, use only your fingers to put them into place in the cylinder body. After that, set up the reservoir (2) inside the seals and rock it to and fro as you push on top to get it into place. Put in both screws for the reservoir where they should be on the master cylinder and reconnect the switch's connector to its main wire. Once done, clean out the prop rod and begin filling and bleeding the vehicle's brake system.