Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2008 Dodge Ram 1500 Blend Door Actuator

Air Blend Door Actuator
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blend Door Actuators found

  • 2008 Dodge Ram 1500 Blend Door Actuator - 5073983AA
    2008 Dodge Ram 1500 Blend Door Actuator - 5073983AA
    2008 Dodge Ram 1500 Blend Door Actuator - 5073983AA
    2008 Dodge Ram 1500 Blend Door Actuator - 5073983AA
    2008 Dodge Ram 1500 Blend Door Actuator Diagram - 5073983AA
    View related parts

    2008 Dodge Ram 1500 Actuator Part Number: 5073983AA

    Product Specifications
    • Other Name: Actuator - A/C and Heater; HVAC Floor, Air Inlet, Heater Blend, and Blend Door Actuator.; Actuator A/C And Heater Includes: Lever, Bracket And Lever.
    • Item Weight: 1.30 Pounds
    • Item Dimensions: 4.8 x 6.3 x 8.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5073983AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Dodge Ram 1500 Submodels:
    • Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
  • 2008 Dodge Ram 1500 Blend Door Actuator - 4885206AB
    2008 Dodge Ram 1500 Blend Door Actuator - 4885206AB
    2008 Dodge Ram 1500 Blend Door Actuator Diagram - 4885206AB
    View related parts

    2008 Dodge Ram 1500 Door Actuator Part Number: 4885206AB

    $137.09 MSRP: $202.00
    You Save: $64.91 (33%)
    Product Specifications
    • Other Name: Actuator - A/C And Heater; HVAC Air Adjustment Control Motor; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator; Actuator; Servo; A/C and Heater Actuator with Bracket, Lever, and Recirculation Door.
    • Item Weight: 0.70 Pounds
    • Item Dimensions: 1.9 x 3.6 x 4.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4885206AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Dodge Ram 1500 Submodels:
    • Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS

2008 Dodge Ram 1500 Blend Door Actuator Parts and Q&A

  • Q: How to Install a Blend Door Actuator in Single and Dual Zone HVAC Systems on 2008 Dodge Ram 1500?
    A: The single zone heating-A/C system has a single blend door actuator; the dual zone system has two, one for each side of the cabin. On the driver side of single or dual zone models, first install the blend door actuator behind the HVAC housing so that the actuator's output shaft lines up with the blend door lever. Attach the actuator to your A/C wire harness with screws of 1.1 Nm (10 in. lbs.) force and link the A/C wire harness connector to the actuator. After that, add the instrument panel and hook up the negative battery cable again. On the passenger side, secure the blend door actuator and bracket assembly to the top of the HVAC housing using 1.1 Nm (10 in. lbs.) screws, attaching a wire harness connector from the HVAC housing to the actuator. When installing the lever, ensure the guide pin on the lever meets with the guides on the blend door linkage, then snap it into position on both the actuator output shaft and the linkage. After that, set the instrument panel and re-connect the negative battery cable.

Related 2008 Dodge Ram 1500 Parts

Alternate Year Models

+
2007 Dodge Ram 1500 Blend Door Actuator 2009 Dodge Ram 1500 Blend Door Actuator