How to Remove and Service a Front Crankshaft Seal on 2008 Dodge Sprinter 3500?

You should disconnect the negative battery cable and lift and hold the vehicle up before servicing the front crankshaft seal. Unscrew both the lower splash shields at the front, the bypass valve and the cooler lines that link the transmission to the engine block. After that, remove the starter blank and set the # 9102 flywheel locking tool onto the car. Adjust the tension of the drive belt accessory by resetting the drive tensioner and adding a retaining pin, then remove the bolt holding the damper. Gently remove the vibration damper by pulling it with special tool #9544 to avoid injury to the timing chain cover. Moreover, take out the front crankshaft seal by using appropriate seal pullers.

OEM 2008 Dodge Sprinter 3500 Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crankshaft Seals found

View related parts
2008 Dodge Sprinter 3500 Crankshaft Seal, Front Part Number: 5073675AB
$53.33 MSRP: $79.25
You Save: $25.92 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Front Crank Seal; Front Seal; Front Cover Seal; Seal Crankshaft Oil Front; Oil Seal; Engine Crankshaft Seal
- Position: Front
- Replaces: 5073675AA, 5073676AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.7 x 2.6 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5073675AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 5 Cyl 2.7 L DIESEL, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Sprinter 3500 Rear Main Seal Retainer Part Number: 68054474AA
Product Specifications
- Other Name: Retainer - Crankshaft Rear Oil Seal
- Position: Rear
- Replaces: 68013857AA, 68013857AB
- Item Weight: 1.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68054474AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Sprinter 3500 Rear Main Seal Retainer Part Number: 68238383AA
Product Specifications
- Other Name: Cover - Crankshaft Rear Oil
- Position: Rear
- Replaces: 68006029AA
- Item Weight: 1.50 Pounds
- Item Dimensions: 10.2 x 8.0 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68238383AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 3.0L V6, 6 Cyl 3.0 L DIESEL

2008 Dodge Sprinter 3500 Crankshaft Seal Parts and Q&A

Q: How to Remove and Service a Front Crankshaft Seal on 2008 Dodge Sprinter 3500?
A: You should disconnect the negative battery cable and lift and hold the vehicle up before servicing the front crankshaft seal. Unscrew both the lower splash shields at the front, the bypass valve and the cooler lines that link the transmission to the engine block. After that, remove the starter blank and set the # 9102 flywheel locking tool onto the car. Adjust the tension of the drive belt accessory by resetting the drive tensioner and adding a retaining pin, then remove the bolt holding the damper. Gently remove the vibration damper by pulling it with special tool #9544 to avoid injury to the timing chain cover. Moreover, take out the front crankshaft seal by using appropriate seal pullers.