How to Remove and Service a Brake Fluid Level Sensor on 2008 Dodge Viper?

Before getting started, study the advice and warnings provided on your brakes and traction control. Open the vehicle wiring harness connector on the brake fluid level switch from inside the master cylinder reservoir. After that, squeeze the retaining tabs together on the right side of the reservoir to let go of the switch. Pull the brake fluid level switch out from the reservoir's left side once all else is done.

OEM 2008 Dodge Viper Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
2008 Dodge Viper Fluid Level Sensor Part Number: 5093251AB
Product Specifications
- Other Name: Switch - Brake Fluid Level; Brake Fluid Level Switch; Switch
- Replaces: 5093251AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.0 x 3.1 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5093251AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS, 8.4L V10

2008 Dodge Viper Brake Fluid Level Sensor Parts and Q&A

Q: How to Remove and Service a Brake Fluid Level Sensor on 2008 Dodge Viper?
A: Before getting started, study the advice and warnings provided on your brakes and traction control. Open the vehicle wiring harness connector on the brake fluid level switch from inside the master cylinder reservoir. After that, squeeze the retaining tabs together on the right side of the reservoir to let go of the switch. Pull the brake fluid level switch out from the reservoir's left side once all else is done.