How to Install a Brake Caliper on 2008 Dodge Viper?

If your brakes have shoes, make sure they are in the caliper before putting it in place. After that, attach the brake caliper to the steering knuckle and hold it place with the bolts, tighten until it reaches 115 Nm (85 ft. lbs.). Always put new copper seal washers in place when joining the brake flex hose to the caliper. Before you tighten the banjo bolt, put copper seal washers on each end of the flex hose and insert the bolt through them and the fitting into the caliper's threaded port, tightening to 31 Nm (23 ft. lbs.). After that, lift the wheel and tire assembly into place and tighten the wheel mounting nuts in the proper sequence to 135 Nm (100 ft. lbs.). Lower the auto and take out the brake pedal holding tool. Occasionally open your brake lines by bleeding brakes if needed and make sure to pump the brake several times to verify a firm brake pedal before moving the car. Do one more road test and stop a few times to allow the new brake shoes to work and the brakes to overcome any dirt.

OEM 2008 Dodge Viper Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Calipers found

View related parts
2008 Dodge Viper Caliper, Rear Driver Side Part Number: 5093309AA
$389.04 MSRP: $469.00
You Save: $79.96 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left; Caliper Disc Brake; Brake Caliper
- Position: Rear Driver Side
- Item Weight: 4.50 Pounds
- Item Dimensions: 10.3 x 6.5 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5093309AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.4 L GAS
View related parts
2008 Dodge Viper Caliper, Rear Passenger Side Part Number: 5093308AA
$389.04 MSRP: $469.00
You Save: $79.96 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Right; Caliper Disc Brake; Brake Caliper
- Position: Rear Passenger Side
- Item Weight: 3.70 Pounds
- Item Dimensions: 8.9 x 8.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5093308AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.4 L GAS
View related parts
2008 Dodge Viper Caliper, Rear Driver Side Part Number: 5136155AA
$488.19 MSRP: $581.00
You Save: $92.81 (16%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left; Caliper Disc Brake; Brake Caliper
- Position: Rear Driver Side
- Item Weight: 9.60 Pounds
- Item Dimensions: 10.5 x 9.6 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5136155AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
2008 Dodge Viper Caliper, Rear Passenger Side Part Number: 5136154AA
$488.19 MSRP: $581.00
You Save: $92.81 (16%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Right; Caliper Disc Brake; Brake Caliper
- Position: Rear Passenger Side
- Item Weight: 9.60 Pounds
- Item Dimensions: 10.6 x 9.7 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5136154AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
2008 Dodge Viper Caliper, Red, Front Passenger Side Part Number: 5136152AA
$533.99 MSRP: $634.00
You Save: $100.01 (16%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Right; Caliper Assembly Disc Brake Front; Caliper Disc Brake; Brake Caliper
- Position: Front Passenger Side
- Item Weight: 9.30 Pounds
- Item Dimensions: 10.4 x 9.4 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5136152AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Viper Submodels:
- ACR, Base, GT, GTC, GTS, SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
2008 Dodge Viper Caliper, Red, Front Driver Side Part Number: 5136153AA
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Left; Caliper Assembly Disc Brake Front; Caliper Disc Brake; Brake Caliper
- Position: Front Driver Side
- Item Weight: 9.30 Pounds
- Item Dimensions: 11.2 x 11.6 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5136153AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Viper Submodels:
- ACR, Base, GT, GTC, GTS, SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS

2008 Dodge Viper Brake Caliper Parts and Q&A

Q: How to Install a Brake Caliper on 2008 Dodge Viper?
A: If your brakes have shoes, make sure they are in the caliper before putting it in place. After that, attach the brake caliper to the steering knuckle and hold it place with the bolts, tighten until it reaches 115 Nm (85 ft. lbs.). Always put new copper seal washers in place when joining the brake flex hose to the caliper. Before you tighten the banjo bolt, put copper seal washers on each end of the flex hose and insert the bolt through them and the fitting into the caliper's threaded port, tightening to 31 Nm (23 ft. lbs.). After that, lift the wheel and tire assembly into place and tighten the wheel mounting nuts in the proper sequence to 135 Nm (100 ft. lbs.). Lower the auto and take out the brake pedal holding tool. Occasionally open your brake lines by bleeding brakes if needed and make sure to pump the brake several times to verify a firm brake pedal before moving the car. Do one more road test and stop a few times to allow the new brake shoes to work and the brakes to overcome any dirt.