How to Remove and Replace a Rear Brake Disc on 2008 Dodge Viper?

To change the rear brake rotor, elevate the car, support it securely and then remove the wheel and tire assembly. After that, take the two bolts off the caliper that hold it to the knuckle and hang the caliper from the control arm with a ziptie. After that, open the two bolts that connect the hydraulic brake caliper to the knuckle and remove the caliper, again holding it up with mechanics wire. With the same rotor, place a mark on the wheel mounting stud and the rotor so that the rotor will be put back in place properly. Also, remove the brake rotor from the combination of the wheel hub and the bearing.

OEM 2008 Dodge Viper Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Discs found

View related parts
2008 Dodge Viper Rotor, Rear Part Number: 5290393AA
$155.22 MSRP: $192.00
You Save: $36.78 (20%)
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Rotor Brake; Brake Rotor
- Position: Rear
- Item Weight: 26.80 Pounds
- Item Dimensions: 14.7 x 14.9 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5290393AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Viper Submodels:
- ACR, Base, GT, GTC, GTS, SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
2008 Dodge Viper Rotor, Front Part Number: 5290394AA
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Rotor Brake; Brake Rotor
- Position: Front
- Item Weight: 27.80 Pounds
- Item Dimensions: 14.8 x 14.4 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5290394AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Viper Submodels:
- ACR, Base, GT, GTC, GTS, SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS

2008 Dodge Viper Brake Disc Parts and Q&A

Q: How to Remove and Replace a Rear Brake Disc on 2008 Dodge Viper?
A: To change the rear brake rotor, elevate the car, support it securely and then remove the wheel and tire assembly. After that, take the two bolts off the caliper that hold it to the knuckle and hang the caliper from the control arm with a ziptie. After that, open the two bolts that connect the hydraulic brake caliper to the knuckle and remove the caliper, again holding it up with mechanics wire. With the same rotor, place a mark on the wheel mounting stud and the rotor so that the rotor will be put back in place properly. Also, remove the brake rotor from the combination of the wheel hub and the bearing.